Home » Asus Manuals » Motherboards » Asus P8B75-M LX PLUS » Manual Viewer

Asus P8B75-M LX PLUS P8B75-M LX PLUS User's Manual - Page 38

System power LED 2-pin PLED

View all Asus P8B75-M LX PLUS manuals

Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

4. System panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. F_PANEL PWR LED PWR BTN PLED+ PLEDPWR GND HD_LED+ HD_LED- Ground Reset P8B75-M LX PLUS PIN 1 +HD_LED RESET P8B75-M LX PLUS System panel connector • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. • Hard disk drive activity LED (2-pin IDE_LED) This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The IDE LED lights up or flashes when data is read from or written to the HDD. • ATX power button/soft-off button (2-pin PWRSW) This connector is for the system power button. • Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. 1-28 Chapter 1: Product introduction

Section	Page
Safety information	6
About this guide	6
P8B75-M LX PLUS specifications summary	8
Product introduction	11
1.1 Special features	11
1.1.1 Product highlights	11
1.1.2 ASUS Exclusive features	12
1.2 Before you proceed	15
1.3 Motherboard overview	15
1.3.1 Placement direction	15
1.3.2 Screw holes	16
1.3.3 Motherboard layout	17
1.3.4 Layout contents	18
1.4 Central Processing Unit (CPU)	19
1.4.1 Installing the CPU	20
1.4.2 CPU heatsink and fan assembly installation	22
1.5 System memory	24
1.5.1 Overview	24
1.5.2 Memory configurations	24
1.5.3 Installing a DIMM	30
1.5.4 Removing a DIMM	30
1.6 Expansion slots	31
1.6.1 Installing an expansion card	31
1.6.2 Configuring an expansion card	31
1.6.3 PCI slot	31
1.6.4 PCI Express 2.0 x1 slots	31
1.7 Jumpers	32
1.6.5 PCI Express 3.0/2.0 x16 slots	32
1.8 Connectors	33
1.8.1 Rear panel connectors	33
1.8.2 Internal connectors	35
1.9 Onboard LEDs	42
1.10 Software support	43
1.10.1 Installing an operating system	43
1.10.2 Support DVD information	43
1.10.3 Intel® SBA support	44
BIOS information	45
2.1 Managing and updating your BIOS	45
2.1.1 ASUS Update utility	45
2.1.2 ASUS EZ Flash 2	46
2.1.3 ASUS CrashFree BIOS 3 utility	47
2.1.4 ASUS BIOS Updater	48
2.2 BIOS setup program	50
BIOS menu screen	51
2.3 Main menu	54
2.3.1 System Language [English]	54
2.3.2 System Date [Day xx/xx/xxxx]	54
2.3.3 System Time [xx:xx:xx]	54
2.3.4 Security	54
2.4 Ai Tweaker menu	56
2.4.1 ASUS MultiCore Enhancement [Enabled]	56
2.4.2 Memory Frequency [Auto]	56
2.4.3 GPU Boost [OK]	57
2.4.4 DRAM Timing Control	57
2.4.5 CPU Power Management	60
2.5 Advanced menu	61
2.5.1 CPU Configuration	62
2.5.2 PCH Configuration	63
2.5.3 SATA Configuration	64
2.5.4 System Agent Configuration	65
2.5.5 AMT Configuration	66
2.5.6 USB Configuration	67
2.5.7 Onboard Devices Configuration	68
2.5.8 APM	69
2.5.9 Network Stack	69
2.6 Monitor menu	70
2.6.1 CPU Temperature / MB Temperature [xxxºC/xxxºF]	70
2.6.2 CPU / Chassis / Power Fan Speed [xxxx RPM] or [Ignore] / [N/A]	70
2.6.3 CPU Q-Fan Control [Enabled]	71
2.6.4 Chassis Q-Fan Control [Enabled]	71
2.6.5 CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage	72
2.6.6 Anti Surge Support [Enabled]	72
2.7 Boot menu	73
2.7.1 Bootup NumLock State [On]	73
2.7.2 Full Screen Logo [Enabled]	73
2.7.3 Wait for ‘F1’ If Error [Enabled]	74
2.7.4 Option ROM Messages [Force BIOS]	74
2.7.5 Setup Mode [EZ Mode]	74
2.7.6 UEFI/Legacy Boot [Enabled both UEFI and Legacy]	74
2.7.7 PCI ROM Priority [Legacy ROM]	74
2.7.8 Boot Option Priorities	74
2.7.9 Boot Override	74
2.8 Tools menu	75
2.8.1 ASUS EZ Flash 2 Utility	75
2.8.2 ASUS O.C. Profile	75
2.8.3 ASUS SPD Information	75
2.9 Exit menu	76
Appendices	77
Notices	77