Asus Pro WS WRX90E-SAGE SE IPMI EXPANSION CARD Users Manual English
Asus Pro WS WRX90E-SAGE SE Manual
View all Asus Pro WS WRX90E-SAGE SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Asus Pro WS WRX90E-SAGE SE manual content summary:
- Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 1
Remote Management LAN Card IPMI expansion card User Guide - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 2
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 3
Contents Safety information...v About this guide...vi Chapter 1: Product Introduction 1.1 Welcome!...1-2 1.2 Package contents 1-2 1.3 IPMI Expansion Card specifications summary 1-3 1.4 IPMI Expansion Card Overview 1-4 1.5 Features...1-6 1.6 System requirements 1-9 1.7 Jumper configurations 1-10 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 4
3-61 3.9 Image Redirection 3-65 3.10 Power Control 3-66 3.11 Locator LED 3-67 3.12 Maintenance 3-68 Appendix A.1 IPMITool help commands A-2 A.2 Common IPMITool commands A-3 A.3 Troubleshooting A-6 Notices ...A-9 Warranty...A-13 ASUS contact information A-15 Service and Support A-15 iv - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 5
yourself. Contact a qualified service technician or your retailer. Operation safety • Before installing any component to the server, carefully read all the manuals that came with the If you encounter technical problems with the product, contact a qualified service technician or your retailer. v - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 6
installed. • Appendix The Appendix shows the location of the LAN ports for server management and BMC connector on server motherboards. This section also presents common problems that you may encounter when installing or using the server management board. Where to find more information Refer to the - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 7
of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 8
viii - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 9
Chapter 1: Product Introduction Product Introduction This chapter describes the IPMI expansion card features, system requirements, and network settings. 1 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 10
buying an ASUS IPMI Expansion Card! The ASUS IPMI Expansion Card can be installed to a non-server ASUS motherboard, and allows you to monitor your remote device in real-time when installed to the ASUS motherboard x IPMI TPM adapter • 1 x Quick start guide If any of the above items is damaged or - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 11
/RST header of motherboard and chassis) 3 Supports Web UI (Remote management) - Supports Virtual media - Supports Network Bonding Windows® 10 - 64 bit, Linux OS including Cent OS, Redhat, and Ubuntu 6.4 inch x 2.7 inch (162mm x 68.95mm ) * Specifications are subject to change without notice. ASUS - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 12
and the 6-pin PSU connector is connected to a power supply. SPI header: Connects to IPMI TPM adapter with cable for burning BIOS. • Client device motherboard model needs to support this function. • To use the BIOS burning function, ensure the SPI header is connected to the IPMI TPM header on the - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 13
header is connected to the USB 2.0 connector on the motherboard. PSU PM_BUS header: Connects to power supply for PSU detection. • Power supply needs to support PSU function. • To use the PSU sensor and power jumper: Used to control LAN IP - Dynamic/Fixed(10.10.10.10). ASUS IPMI Expansion Card 1-5 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 14
• Backup-Restore BMC Configuration • BIOS Configuration • BIOS Update • ASUS Thermal Radar • BMC Secured Boot 2. KVM Support • JViewer support • HML5Viewer Support • Jviewer Standalone Application • Physical KeyBoard Language Selection support • Keyboard LED sync with Client Keyboard LED status - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 15
• Network • Network Bond • Domain Name Server (DNS) • Platform Event Filter (PEF) • Services • Simple Mail Transfer Protocol (SMTP) • Secure Sockets Layer (SSL) protocol provides secure encryption schemes, and supports security mechanisms such as SSL (Secure Sockets Layer) and SSH (Secure Shell - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 16
• Firmware Update • Restore Factory Defaults • Sign Out • RedFish API Support 5. Network Support • IPv4 support • IPv6 support • Bonding Support • Fully Qualified Domain Name (FQDN) Support • Network Time Protocol (NTP) Server support • Advanced IP Routing • Set default Network to DHCP • Dynamic DNS - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 17
notice. 1.6 System requirements Before you install the IPMI expansion card, check if the client device meets the following requirements: • ASUS motherboard that supports IPMI expansion card* • LAN (RJ-45) port for server management • Firefox (Windows and Linux), Chrome (Windows and Linux), Edge - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 18
1.7 Jumper configurations VGA switch jumper BMC switch jumper SMART_PSU switch jumper LAN IP mode switch jumper VGA_SW 12 23 Enable (Default) Disable BMC_SW 12 23 Enable (Default) Disable SMART_PSU 12 23 Enable Disable (Default) DM_IP_SEL1 12 23 Not fixed IP Fixed IP (Default) ( - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 19
1.8 Network setup The IPMI expansion card installed on the client device motherboard connects to a local/central server via direct LAN connection or through a network hub. Below are the supported network management configurations. Direct LAN connection RJ-45 cable Client device Central server - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 20
1-12 Chapter 1: Product Introduction - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 21
Chapter 2: Installation Information Installation Information This chapter provides instructions on how to install the IPMI expansion card to the client device motherboard and BIOS BMC settings. 2 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 22
cable to the BMC header (BMC_HEADER) on the IPMI expansion card and the BMC header on your motherboard. Only connect this header if your motherboard features a BMC_HEADER, please refer to the user manual that came with your motherboard package for more details. 2-2 Chapter 2: Hardware Information - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 23
IPMI expansion card with power, connect the USB 2.0 cable to the USB connector (USB) on the IPMI expansion card and the USB 2.0 connector on your motherboard. 3. For SPI functions, connect the SPI cable to the SPI TPM header (SPI) on the IPMI expansion card and the header on the IPMI TPM - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 24
are connected in opposite orientations when connecting them to the Panel header on your motherboard. For more information on the pin definitions of the Panel header on your motherboard, please refer to your motherboard's user guide. MB pins 5. Connect the Power On/Off cable and Reset cables from the - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 25
the PMBus connector from the PSU to the PSU PM_BUS header (PSUSMB) for monitoring information on the PSU such as voltage, current, and temperature. PSUSMB ASUS IPMI Expansion Card 2-5 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 26
the 6-pin PCIE power connector from the PSU to the 6-pin PSU connector (PCIE_PWR). 10. Insert the IPMI expansion card to a PCIe slot on your motherboard. 11. Connect a LAN cable to the LAN port for remote management. • For direct LAN configuration, connect the other end of the LAN cable to the - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 27
which supports the IPMI expansion card for the client device motherboard. Follow the steps below to configure the BIOS settings of the client device after updating the BIOS. • Update the motherboard BIOS file following the instructions in the motherboard user guide. Visit the ASUS website (www.asus - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 28
OS Watchdog Timer This item allows you to start a BIOS timer which can only be shut off by Intel Management Software after the OS loads. Configuration options: [Disabled] [Enabled] The following items is configurable only when the OS Watchdog Timer is set to [Enabled]. OS Wtd Timer Timeout Allows - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 29
BMC network configuration Allows you to set the BMC LAN parameter settings. Configure IPV4 support Lan channel 1 Configuration Address source Allows you to set the LAN channel parameters statically address. Router MAC Address Allows you to set the router MAC address. ASUS IPMI Expansion Card 2-9 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 30
Configuration options: [Enabled] [Disabled] The following items appear only when IPV6 support is set to [Enabled]. Configuration Address source Allows you to set the LAN channel parameters statically or dynamically (by BIOS or by BMC). [Unspecified] option - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 31
2.3.5 View System Event Log Allows you to view all the events in the BMC event logs. It will take a maximum of 15 seconds to read all the BMC SEL records. ASUS IPMI Expansion Card 2-11 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 32
2.4 BMC management with IPMITool You can download and use IPMITool to use a console to configure the BMC settings, manage, and use functions of the remote device, such as IP address configuration, view details on the sensors, manage users, view the power status of the remote device, or manage the - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 33
Chapter 3: Web-based User Interface Web-based User Interface This chapter tells you how to use the web-based user interface to manage and configure the client device with an IPMI expansion card installed. 3 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 34
3.1 Web-based user interface The web-based user interface allows you to easily monitor the client device's hardware information including temperatures, fan rotations, voltages, and power. By opening the GUI in a browser you can manage the client device remotely, even when there is no OS installed on - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 35
in profile, or view or manage the profile. View the device information or use remote device function. Displays all information related to the function selected. ASUS IPMI Expansion Card 3-3 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 36
3.1.3 BIOS settings Set the BIOS settings for the remote device. 1. Click on BIOS from the user interface toolbar located in the top right of the main page. 2. Enter the user account name and password. 3. You can begin configuring or viewing the BIOS settings of the remote device once you have - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 37
PSU redundancy status. Displays the sensor monitoring status. • Displays the event log records for today. • Displays the event log records for the past 30 days. ASUS IPMI Expansion Card 3-5 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 38
a sensor from the Normal Sensors section will display a Live Widget which will display its behavior over time. • Under certain platforms, some sensors can only support one-time updates and will not update over time. • The fan's UNC / UC / UNR will not create an event log when the rotation speed - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 39
1-3 are connected to the motherboard. • To use the real-time sensor monitoring function (if supported), ensure the BMC header is connected to the BMC header on the motherboard. 3.3.1 Sensor detail The privilege users. For other users, this button will be disabled. ASUS IPMI Expansion Card 3-7 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 40
2. Adjust the threshold values, then click on Save. 3-8 Chapter 3: Web-based User Interface - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 41
storage device controller information of the remote device: name, serial number, manufacturer, protocol, model, revision, enryption status, media type, state, size (GB), and speed (Gbps). ASUS IPMI Expansion Card 3-9 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 42
3.5 FRU Information This Page displays the BMC's FRU (Field Replaceable Units) device information. The FRU page shows Basic Information, Chassis Information, Board Information and Product Information of the FRU device. Scroll down to view more items. To view the information on an FRU device: 1. - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 43
3.6 Logs & Reports This menu contains the IPMI Event Log, System Log, Audit Log, and Video Log. ASUS IPMI Expansion Card 3-11 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 44
details of that entry. Hovering over the graph will allow you to view the number of events by date. Filter by Date Select the time period to filter by selecting the Start Date and the End Date from the calender. You can also click on the clock icon at the bottom of the calendar - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 45
You can click on an event to view the date and time of the event. ASUS IPMI Expansion Card 3-13 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 46
time if the BMC remote device was not connected to the network when it was powered on. Filter by Date Select the time period to filter by selecting the Start Date and the End Date from the calender. You can also click on the clock icon at the bottom of the calendar to - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 47
to be configured under Settings > Log Settings > Advanced Log Settings in order to display any entries. Filter by Date Select the time period to filter by selecting the Start Date and the End Date from the calender. You can also click on the clock icon at the bottom of the calendar to add - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 48
to filter by selecting the Start Date and the End Date from the calender. You can also click on the clock icon at the bottom of the calendar to add a time filter. • If remote video support is enabled, a maximum of 3 pre-event videos may be recorded. If remote video support is disabled, only 1 pre - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 49
Date & Time This page allows you to set the date and time on the BMC. You can either select a time zone from the interactive map, or manually set the date and time. • If the time zone is selected from the group of manual offset (GMT/ETC time zones), - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 50
PTP Unicast IP Configure a Unicast IP when Ipmode is unicast and server to use when automatically settings the date and time. This item is only configurable if Automatic PTP Date & Time is set to enabled. PTP Delay Mechanism Configure a PTP delay mechanism to use when automatically settings the - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 51
server to use when automatically settings the date and time. This item is only configurable if Automatic PTP Date & Time is set to enabled. automatically settings the date and time. This item is only configurable if Automatic PTP Date & Time is set to enabled. 3.7.2 External User Services This page - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 52
LDAP) is an application protocol for querying and modifying data of directory services implemented in Internet Protocol (IP) networks. If you have an LDAP LDAP/E-Directory server address. • IPV4 and IPV6 address formats are supported by LDAP/E-Directory Server Address. • When using StartTLS with FQDN - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 53
. Set the attribute to indicate to the LDAP/EDirectory which attribute to identify the user by. Only supports cn or uid. Browse for the file that contains the certificate of the trusted CA certs. • This item is only configurable if Encryption Type is set to SSL. ASUS IPMI Expansion Card 3-21 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 54
Address 1-3 Set a domain name for the user. Enter the IP address of the active directory server. • At least 1 Domain Controller Server Address must be configured • Supports IPV4 and IPV6 Address format. 3-22 Chapter 3: Web-based User Interface - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 55
address. Server Address IPV4 and IPV6 address formats, and FQDN (Fully Qualified Domain Name) format is supported. Port Set RADIUS port. • Default port is 1812. • Port value ranges from 1 - 65535 127 characters for each field. • The '#' character is not allowed. ASUS IPMI Expansion Card 3-23 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 56
the keyboard and mouse function for KVM remote control, ensure the USB header is connected to the USB 2.0 connector on the motherboard. Relative Positioning (Linux) Absolute Positioning (Windows) Other Mode (SLES-11 OS Installation) Calculated relative mouse position displacement is sent to the - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 57
select between UDP or TCP. Setting the port type will only be supported when Remote Log is enabled. File Size Rotate Count Specify the size of and IPV6 address formats, and FQDN (Fully Qualified Domain Name) format is supported. Remote Server Port Set the port number to log system events. If - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 58
set the media redirection settings. General Settings This page allows you to enable or disable Local Media support, check or uncheck the checkbox respectively. Remote Media Support Enable or disable remote media support. When enabled, CD/DVD and Hard disk remote media types will appear. Users can - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 59
to be stored IPV4 and IPV6 address formats, and FQDN (Fully Qualified Domain Name) format is supported. Mount Harddisk Enter the path of the remote media on the server. Path in server Path media; either NFS or Harddisk Samba (CIFS). (continued on the next page) ASUS IPMI Expansion Card 3-27 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 60
characters are not allowed VMedia Instance Settings This page allows you to configure settings for the redirection of virtual media to the number of supported CD/DVD devices. CD/DVD device instances Hard disk instances Remote KVM CD/DVD device instances Remote KVM hard disk instances Select the - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 61
the MAC address of the selected interface and is read only. Enable or disable IPv4 support for the selected interface. Enable this option to dynamically configure IPv4 address using Dynamic Host from 0 to 255. • First number cannot be 0. (continued on the next page) ASUS IPMI Expansion Card 3-29 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 62
separated by dots as in 'xxx.xxx.xxx.xxx'. • Each set ranges from 0 to 255. • First number cannot be 0. Enable or disable IPv6 support for the selected interface. Enable this option to dynamically configure IPv6 address using Dynamic Host Configuration v6 Protocol (DHCPv6). Select an IPv6 Index - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 63
255. • First number cannot be 0. Enable or disable VLAN support for the selected interface. Specify an ID for this VLAN services. Enable or disable Multicast DNS. Select whether the host name will be configured manually Manual. (continued on the next page) ASUS IPMI Expansion Card 3-31 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 64
server does not support option 81, and Hostname method registration does not support IPv6 Domain date and time of the current TSIG private file (Read-Only) Browse for a new TSIG private file to upload to the BMC. Domain Setting Select whether the domain interface will be configured manually - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 65
Addresses are supported and must be global unicast addresses. • These items are only configurable if Domain Setting is set to Manual. 3.7.8 PAM Order Settings This page allows you to configure the PAM order for user authentication into the BMC. The list of PAM modules supported - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 66
3.7.9 Platform Event Filters Platform Event Filtering (PEF) provides a mechanism for configuring the BMC to take selected actions on event messages that it receives or has internally generated. These actions include operations such as system power-off, system reset, as well as triggering the - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 67
Select the type of sensor that will trigger the event filter action. Select the particular sensor from the sensor list. (continued on the next page) ASUS IPMI Expansion Card 3-35 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 68
Event Options Event trigger Event Data 1 AND Mask Event Data 1 Compare 1 Event Data 1 Compare 2 Event Data 2 AND Mask Event Data 2 Compare 1 Event Data 2 Compare 2 Event Data 3 AND Mask Event Data 3 Compare 1 Event Data 3 Compare 2 Select an event option from either All events or Sensor specific - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 69
. Select a destination from the configured destination list. Destination Selector LAN destinations have to be configured under Configuration > PEF > LAN Destination. (continued on the next page) ASUS IPMI Expansion Card 3-37 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 70
Event Specific Alert String Alert String Key Check this item to specify an event-specific Alert String. Select from a set of values (all linked to strings that are kept in the PEF configuration parameters), to specify which is to be sent for this Alert Policy entry. LAN Destinations This page - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 71
the IP address of the system that will receive the alert. • IPV4 and IPV6 address formats are supported. • This item is only configurable if Destination Type is set to SNMP Trap. If Destination type is item is only configurable if Destination Type is set to E-Mail. ASUS IPMI Expansion Card 3-39 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 72
as the Administrator. • Click on the icon to terminate the particular session of the service. • Click on the icon view or terminate the connected session for this device. • The default user ID ranges for the supported PAM Modules are: - Active Directory User: from 3000 - 3999 - LDAP/E-Directory User - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 73
enabled. • This item is only configurable if Active is enabled. Used to configure secure port numbers for the services. • Web default port is 443. • KVM default port is 443. • CD Media default port is 443 configurable if Active is enabled. (continued on the next page) ASUS IPMI Expansion Card 3-41 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 74
if Active is enabled. Displays the maximum number of allowed sessions for the service. 3.7.11 SMTP Settings The SMTP page allows you to configure SMTP mail server. LAN Interface Sender Email ID Primary SMTP Support Select the LAN interface to be configured. Enter a valid Sender Email ID on - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 75
SMTP Server Authentication Types are: - CRAM-MD5 - LOGIN - PLAIN If the SMTP server does not support any of the above authentication types, the user will get an error message stating, 'Authentication type is not supported by SMTP server'. (continued on the next page) ASUS IPMI Expansion Card 3-43 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 76
or disable the SMTP SSLTLS protocol. Primary SMTP SSLTLS Enable This item is only configurable if Primary SMTP Support is enabled. Primary SMTP STARTTLS Enable Secondary SMTP Support Secondary Server Name Enable or disable the SMTP STARTTLS protocol. This item is only configurable if Primary - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 77
25. • Port value ranges from 1 to 65535. • This item is only configurable if Secondary SMTP Support is enabled. Specify the Secondary SMTP Secure Port. Secondary Secure SMTP port • Default port is 465. SMTP Authentication is enabled. (continued on the next page) ASUS IPMI Expansion Card 3-45 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 78
SMTP Authentication is enabled. Secondary SMTP SSLTLS Enable Enable or disable the SMTP SSLTLS protocol. This item is only configurable if Primary SMTP Support is enabled. Secondary SMTP STARTTLS Enable Enable or disable the SMTP STARTTLS protocol. This item is only configurable if Primary SMTP - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 79
about the Certificate Issuer. The Validity Information displays the validity period of the uploaded certificate. The Issued To section contains information for the certificate holder. ASUS IPMI Expansion Card 3-47 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 80
Generate SSL Certificate This page allows you to create an SSL certificate. Enter the common name for which the certificate is to be generated. Common Name (CN) • Maximum of 64 alpha-numeric characters. • Special characters '#' and '$' are not allowed. Organization (O) Enter the name of the - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 81
privileges. • To add or delete a firewall, the user must have Administrator privileges. • To ensure the date and time of the firewall rule works properly, make sure to set the BMC system time before setting the rules with timeout. (continued on the next page) ASUS IPMI Expansion Card 3-49 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 82
. The firewall rule will become effective from this time. This item is only configurable if Timeout is enabled. The firewall rule will expire on this date. This item is only configurable if Timeout is enabled. The firewall rule will expire at this time. This item is only configurable if Timeout is - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 83
privileges. • To add or delete a firewall, the user must have Administrator privileges. • To ensure the date and time of the firewall rule works properly, make sure to set the BMC system time before setting the range of Port Addresses. (continued on the next page) ASUS IPMI Expansion Card 3-51 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 84
the protocol (TCP, UDP, or Both). Select the network type (IPv4, IPv6, or Both). Enable or disable Timeout support for the new rule. The firewall rule will become effective from this date. This item is only configurable if Enable Timeout is enabled. The firewall rule will become effective from this - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 85
-sensitive. Change password Check this option to change the password. This item is only available when editing an existing user. (continued on the next page) ASUS IPMI Expansion Card 3-53 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 86
Password Size Select the preferred size for the password. This item is only configurable if Change password is enabled or when adding a new user. Password The password field is mandatory and should have a minimum of 8 characters. This item is only configurable if Change password is enabled or - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 87
be displayed (read only). Click the Browse button and navigate to the new public SSH key file. SSH Key file should be of pub type. ASUS IPMI Expansion Card 3-55 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 88
for your system. KVM service should be enabled to perform auto-video recording. The date and time event should be in advance of the current system date and time. Pre-Event will be stored in the local path of the BMC. If remote video support is enabled, then the video files will be stored only to the - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 89
to be stored. • IPV4 and IPV6 address formats, and FQDN (Fully Qualified Domain Name) format is supported. • This item is only configurable if Record Video to Remote Server is enabled. Enter the path of the (FPS). Select the duration of the video recording (seconds) ASUS IPMI Expansion Card 3-57 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 90
On Events Chassis Power Off Events Chassis Reset Events LPC Reset Events Date and Time Event You can check/uncheck a box on the Event List the video files will be stored in the local path of the BMC. If remote video support is enabled, then the video files will be stored only to the remote path, and - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 91
. Select this option to set the fan mode to full speed mode. Customizedf This page allows you to configure fan duty corresponding to different temperatures. ASUS IPMI Expansion Card 3-59 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 92
Temperature Source This page allows you to select a desired temperature source to control your fan. If no temperature is obtained, the CPU temperature will be used. If CPU temperature is not obtained, fan control will be set to 60%. These settings will also be applied to every fan in control mode. - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 93
the Java Web Start exe file and the corresponding .jnlp file to use the JViewer function. Click to launch the HTML Serial Over LAN window. ASUS IPMI Expansion Card 3-61 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 94
to show or hide the local mouse cursor on the remote client system. This option allows you to select the mode or type of mouse support: - Absolute Mouse Mode - Relative Mouse Mode - Other Mouse Mode This option allows you to adjust the zoom on the KVM screen: - Normal - Zoom In - Zoom - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 95
can be used to act as a press and release on the corresponding key when in Console Redirection: - Ctrl + Alt + Del Press and Release - Left Windows Key - Right Windows Key - the text box and press then release the key event combination to define a macro. Hot Keys Add Hot Keys (continued on - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 96
Video Record Record Video Stop Recording Record Settings Power Active Users Help Browse File Start Media This option allows you to start recording the console redirection screen. This option allows you to stop recording the console redirection screen. This menu item allows you to configure the - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 97
> General Settings. • To start redirection or clear an image, you must have Administrator privileges. • Supported CD/DVD format: ISO9660, UDF(v1.02~v2.60) • Supported CD/DVD media file type: (*.iso), (*.nrg) • Supported HDD media file type: (*.img), (*.ima) ASUS IPMI Expansion Card 3-65 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 98
). Initiate operating system shutdown prior to the shutdown. To use the power on/off and reset function, ensure the PANEL header is connected to the motherboard and the chassis panel. 3-66 Chapter 3: Web-based User Interface - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 99
is on, the LED will stay lit up. Enter the identify interval in seconds then press Perform Action to perform a chassis identify command control operation. ASUS IPMI Expansion Card 3-67 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 100
select specific configuration items to backup. Check the desired items and click Download Config to download the .bak file. Check All SNMP KVM Network & Services IPMI NTP Authentication SYSLOG Check all items. Check the item that needs to be backed up. • You will be able to save the backup config - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 101
Information This page displays the Build Date, Build Time, and Firmware Version of the active BMC image. Build Date Build Time Firmware version Displays the build date of the active BMC image. Displays use to update the firmware. 2. Click on Start firmware update. ASUS IPMI Expansion Card 3-69 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 102
sections. 6. Click on Flash selected sections to begin flashing the selected sections. • After entering the update mode, the widgets, other web pages and services will not work. All open widgets will be automatically closed. If the upgrade is cancelled in the middle of the update, the device will be - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 103
the factory defaults, the Web-based user interface screen will become white and you will be automatically logged out of the Web-based user interface. ASUS IPMI Expansion Card 3-71 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 104
System Administrator This page allows you to change the System Administrator settings. Username Enable User Access Change Password Password Confirm Password Displays the username of the system administrator (read-only). Enable or disable user access for the system administrator. Check this option - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 105
Browse, then select the BIOS image file (.cap) you wish to use for the update. BIOS firmware only supports .cap files. 2. Click on Upload BIOS file to activate local media and mount the BIOS file into the storage for the BIOS file and perform the BIOS update. ASUS IPMI Expansion Card 3-73 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 106
, ensure the SPI header is connected to the IPMI TPM header on the motherboard. Clear MB CMOS This page allows you to restore the client device's BIOS MB CMOS function is only available if the client device's motherboard supports this function. • The Clear MB CMOS function can only be used when the - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 107
Appendix Appendix The Appendix shows the location of the LAN ports for server management and BMC connector on server motherboards. This section also presents common problems that you may encounter when installing or using the server management board. - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 108
A.1 IPMITool help commands Command raw i2c spd lan chassis power event mc sdr sensor fru gendev sel pef sol tsol isol user channel session sunoem kontronoem picmg fwum firewall exec set hpm ekanalyzer ime vita lan6 Description Send a RAW IPMI request and print response. Send an I2C Master Write- - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 109
power cycle. View user information. Add user. Set to 1 for anonymous user, and 2 for administrator. Set user password. (continued on the next page) ASUS IPMI Expansion Card A-3 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 110
Command option ipmitool -H (BMC IP address) -I lanplus -U (username) -P (password) user priv ipmitool -H (BMC IP address) -I lanplus -U (username) -P (password) user enable/disable ipmitool -H (BMC IP address) -I lanplus -U (username) -P (password) sol activate - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 111
Command option ipmitool -H (BMC IP address) -I lanplus -U (username) -P (password) raw 0x30 0x96 ipmitool -H (BMC IP address) -I lanplus -U (username) -P (password) raw 0x30 0x98 Description Get PSU address. Get BMC hardware version. ASUS IPMI Expansion Card A-5 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 112
Troubleshooting This troubleshooting guide provides answers to some common problems that you may encounter while installing and/or using the IPMI Expansion Card. These problems require simple troubleshooting that you can perform by yourself. Contact the Technical Support if you encounter problems - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 113
Problem Some sensors are not creating event logs, to set the BMC system time before configuring the firewall. This will ensure the date and time of the configured firewall rule is working properly. 1. You may choose between update page. (continued on the next page) ASUS IPMI Expansion Card A-7 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 114
Problem How do you perform an update after selecting and uploading the BIOS when executing BIOS OOB update. Solution Click on power restart from the shortcut menu after uploading the BIOS file, the BIOS OOB will automatically update after the client device has restarted. A-8 Appendix - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 115
Notices FCC Compliance Information Responsible Party: Asus Computer International Address: 48720 Kato Rd., Fremont, CA 94538, USA frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 116
. See the License for the specific language governing permissions and limitations under the License. Declaration of compliance for product environmental regulation ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 117
to http://csr. asus.com/english/Takeback.htm for detailed recycling information in different regions. DO NOT throw the motherboard in municipal waste. This require assistance please call ASUS Customer Service 1300 2787 88 or visit us at https://www.asus.com/support/. ASUS IPMI Expansion Card A-11 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 118
ţelor esenţiale şi altor prevederi relevante ale directivelor conexe. Textul complet al declaraţiei de conformitate a Uniunii Europene se găseşte la: www.asus.com/support Srpski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj u saglasnosti sa osnovnim zahtevima i drugim relevantnim odredbama - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 119
vající ze zákonné záruky. Všechny informace o záruce najdete na adrese https://www.asus.com/cz/support/. F: Garantie ASUS • ASUS fournit une garantie commerciale en tant que garantie volontaire du fabricant. • ASUS se réserve le droit d'interpréter et de clarifier les informations relatives à la - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 120
rättigheterna under den lagstadgade garantin. För all garantiinformation, besök https://www.asus.com/se/support/. UA ASUS • ASUS • ASUS ASUS https://www.asus.com/ua/support. BP: Informações de garantia ASUS Esta garantia aplica-se ao período definido pela garantia legal (90 dias) mais o per - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 121
Address: Harkortstrasse 21-23, 40880 Ratingen, Germany ASUSTeK (UK) LIMITED Address: 1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M 6BL, England, United Kingdom Service and Support Visit our multi-language website at https://www.asus.com/support. ASUS IPMI Expansion Card A-15 - Asus Pro WS WRX90E-SAGE SE | IPMI EXPANSION CARD Users Manual English - Page 122
A-16 Appendix
Remote Management LAN Card
IPMI expansion card
User Guide