Asus Pro WS WRX90E-SAGE SE IPMI EXPANSION CARD Users Manual English - Page 67
Slave Address/Software ID, Alert Policy Group Number
View all Asus Pro WS WRX90E-SAGE SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Alert Policy Group Number Select a configured alert policy number from the dropdown list. Alert Policy can be configured under Configuration > PEF > Alert Policy. Raw Data Generator ID 1 Enable this option to enter the Generator ID with raw data. Enter the raw generator ID1 data value. This item is only configurable if Raw Data is enabled. Generator ID 2 Enter the raw generator ID2 data value. • In the RAW data field, prefix the value with '0x' to specify hexidecimal value. • This item is only configurable if Raw Data is enabled. Generator Type Select the event generator as Slave Address - if event is generated from IPMB, or software. This item is only configurable if Raw Data is disabled. Slave Address/Software ID Select the System Software ID - if event is generated from system software. This item is only configurable if Raw Data is disabled. Channel Number Select the particular channel number through which the event message is received over. Select '0' if the event message is received via the system interface, primary IPMB, or internally generated by the BMC. This item is only configurable if Raw Data is disabled. IPMB Device LUN Select the corresponding IPMB Device if event is generated by IPMB. This item is only configurable if Raw Data is disabled. Sensor type Sensor name Select the type of sensor that will trigger the event filter action. Select the particular sensor from the sensor list. (continued on the next page) ASUS IPMI Expansion Card 3-35