Asus Rampage II GENE User Guide - Page 102
Hardware Monitor, CPU Fan; Chassis Fan1/2; OPT Fan1/2 Speed [xxxxRPM] or [Ignored] / [N/A]
UPC - 610839170081
View all Asus Rampage II GENE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
3.6.6 Hardware Monitor Hardware Monitor Voltage Monitor Temperature Monitor Fan Speed Monitor Fan Speed Control BIOS SETUP UTILITY Power Voltage Monitor Voltage Monitor CPU Voltage; CPU PLL Voltage; QPI/DRAM Core Voltage; IOH Voltage; IOH PCIE Voltage; ICH Voltage; ICH PCIE Voltage; DRAM Bus Voltage; 3.3V Voltage; 5V Voltage; 12V Voltage The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. Temperature Monitor CPU Temperature; MB Temperature; NB Temperature; SB Temperature; OPT FAN1/2 Temperature [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the CPU, northbridge, southbridge, motherboard, power, and the assigned devices temperatures. Select [Ignored] if you do not wish to display the detected temperatures. NB overheat protection; SB overheat protection [90ºC] The system automatically shuts down when the northbridge or southbridge chipset is heated over the set temperature to protect it from damage. Configuration optitons: [Disabled] [70ºC] [80ºC] [90ºC] �[1�0�0��ºC��] OPT FAN1/2 overheat protection [90ºC] Allows you to set the temperature over which the system automatically shuts down when any of the thermal sensor cables connected to the motherboard detects device overheat to protect the device from damage. Configuration options: [Disabled] [70ºC] [80ºC] [90ºC] �[1�0�0��ºC��] Fan Speed Monitor CPU Fan; Chassis Fan1/2; OPT Fan1/2 Speed [xxxxRPM] or [Ignored] / [N/A] The onboard hardware monitor automatically detects and displays the CPU fan, chassis fan, power fan, and optional fan speed in rotations per minute (RPM). If any of the fans is not connected to the motherboard, the field shows [N/A]. These items are not user‑configurable. 3-32 Chapter 3: BIOS setup