Home » Asus Manuals » Motherboards » Asus Rampage II GENE » Manual Viewer

Asus Rampage II GENE User Guide - Page 89

SATA 1–6, Type [Auto], LBA/Large Mode [Auto], Block Multi-sector Transfer M [Auto]

UPC - 610839170081

View all Asus Rampage II GENE manuals

Add to My Manuals
Save this manual to your list of manuals

Page 89 highlights

3.4.4 SATA 1-6 While entering Setup, the BIOS automatically detects the presence of Serial ATA devices. There is a separate sub-menu for each SATA device. Select a device item then press to display the SATA device information. Main BIOS SETUP UTILITY SATA 1 Device :Hard Disk Vendor :HDT722516DLA380 Size :164.7GB LBA Mode :Supported Block Mode:16Sectors PIO Mode :4 Async DMA :MultiWord DMA-2 Ultra DMA :Ultra DMA-5 SMART Monitoring:Supported Type [Auto] LBA/Large Mode [Auto] Block(Multi-Sector Transfer)M [Auto] PIO Mode [Auto] DMA Mode [Auto] SMART Monitoring [Auto] 32Bit Data Transfer [Enabled] Select the type of device connected to the system. ←→ Select Screen ↑↓ Select Item +- Change Field F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2009, American Megatrends, Inc. The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART monitoring). These values are not user-configurable. These items show [Auto] if no IDE device is installed in the system. Type [Auto] Selects the type of SATA drive. Setting to [Auto] allows automatic selection of the appropriate SATA device type. Select [CDROM] if you are specifically configuring a CD-ROM drive. Select [ARMD] (ATAPI Removable Media Device) if your device is either a ZIP, LS-120, or MO drive. Configuration options: [Not Installed] [Auto] [CDROM] [ARMD] LBA/Large Mode [Auto] Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Configuration options: [Disabled] [Auto] Block (Multi-sector Transfer) M [Auto] Enables or disables data multi-sectors transfers. When set to [Auto], the data transfer from and to the device occurs multiple sectors at a time if the device supports multi-sector transfer feature. When set to [Disabled], the data transfer from and to the device occurs one sector at a time. Configuration options: [Disabled] [Auto] PIO Mode [Auto] Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4] ROG Rampage II GENE 3-19

Section	Page
Contents	3
Notices	8
Safety information	9
About this guide	10
Rampage II GENE specifications summary	12
Chapter 1: Product introduction	15
1.1 Welcome!	17
1.2 Package contents	17
1.3 Special features	18
1.3.1 Product highlights	18
1.3.2 ROG Intelligent Performance & Overclocking features	19
1.3.3 ROG unique features	20
1.3.4 ASUS special features	21
Chapter 2: Hardware information	23
2.1 Before you proceed	25
2.2 Motherboard overview	30
2.2.1 Motherboard layout	30
2.2.2 Layout contents	31
2.2.3 Placement direction	32
2.2.4 Screw holes	32
2.3 Central Processing Unit (CPU)	33
2.3.1 Installing the CPU	34
2.3.2 Installing the CPU heatsink and fan	37
2.3.3 Uninstalling the CPU heatsink and fan	38
2.4 System memory	39
2.4.1 Overview	39
2.4.2 Memory configurations	40
2.4.3 Installing a DIMM	46
2.4.4 Removing a DIMM	46
2.5 Expansion slots	47
2.5.1 Installing an expansion card	47
2.5.2 Configuring an expansion card	47
2.5.3 Interrupt assignments	48
2.5.4 PCI slot	49
2.5.5 PCI Express x4 slot	49
2.5.6 PCI Express 2.0 x16 slots	49
2.6 Jumper	51
2.7 Connectors	52
2.7.1 Rear panel connectors	52
2.7.2 Internal connectors	54
2.7.3 Onboard switches	64
2.7.4 Installing I/O shield and LCD Poster	66
2.8 Starting up for the first time	67
2.9 Turning off the computer	68
2.9.1 Using the OS shut down function	68
2.9.2 Using the dual function power switch	68
Chapter 3: BIOS setup	69
3.1 Managing and updating your BIOS	71
3.1.1 ASUS Update utility	71
3.1.2 ASUS EZ Flash 2 utility	74
3.1.3 ASUS CrashFree BIOS 3 utility	75
3.2 BIOS setup program	76
3.2.1 BIOS menu screen	77
3.2.2 Menu bar	77
3.2.3 Navigation keys	77
3.2.4 Menu items	78
3.2.5 Submenu items	78
3.2.6 Configuration fields	78
3.2.7 Pop-up window	78
3.2.8 Scroll bar	78
3.2.9 General help	78
3.3 Extreme Tweaker menu	79
3.3.1 Tuning Mode [Extreme OC]	80
3.3.2 CPU Level Up [Auto]	80
3.3.3 Memory Level Up [Auto]	80
3.3.4 Ai Overclock Tuner [Auto]	80
3.3.5 CPU Ratio Setting [Auto]	81
3.3.6 CPU Configuration	81
3.3.7 DRAM Frequency [Auto]	82
3.3.8 DRAM Timing Control	82
3.3.9 EPU II Phase Control [Full Phase]	83
3.3.10 CPU Load-Line Calibration [Auto]	84
3.3.11 QPI Load-Line Calibration [Disabled]	84
3.3.12 CPU Differential Amplitude [Auto]	84
3.3.13 NB OCP [Enabled]	84
3.3.14 DRAM OCP [Enabled]	84
3.3.15 Extreme OV [Disabled]	84
3.3.16 CPU Voltage [Auto]	84
3.3.17 CPU PLL Voltage [Auto]	85
3.3.18 QPI/DRAM Core Voltage [Auto]	85
3.3.19 IOH Voltage [Auto]	85
3.3.20 IOH PCIE Voltage [Auto]	85
3.3.21 ICH Voltage [Auto]	85
3.3.22 ICH PCIE Voltage [Auto]	85
3.3.23 DRAM Bus Voltage [Auto]	85
3.3.24 DRAM REF Voltages	86
3.3.25 Debug Mode [String]	86
3.3.26 Keyboard TweakIt Control [Disabled]	86
3.3.27 CPU Spread Spectrum [Auto]	86
3.3.28 PCIE Spread Spectrum [Auto]	86
3.3.29 CPU Clock Skew [Auto]	87
3.3.30 IOH Clock Skew [Auto]	87
3.4 Main menu	88
3.4.1 System Time [xx:xx:xx]	88
3.4.2 System Date [Day xx/xx/xxxx]	88
3.4.3 Language [English]	88
3.4.4 SATA 1–6	89
3.4.5 Storage Configuration	90
3.4.6 System Information	91
3.5 Advanced menu	92
3.5.1 CPU Configuration	92
3.5.2 Chipset	94
3.5.3 Onboard Device Configuration	95
3.5.4 USB Configuration	96
3.5.5 PCI PnP	97
3.5.6 LCD Poster and LED Control	98
3.5.7 iROG Configuration	99
3.6 Power menu	100
3.6.1 Suspend Mode [Auto]	100
3.6.2 Repost Video on S3 Resume [No]	100
3.6.3 ACPI 2.0 Support [Disabled]	100
3.6.4 ACPI APIC Support [Enabled]	100
3.6.5 APM Configuration	101
3.6.6 Hardware Monitor	102
3.7 Boot menu	105
3.7.1 Boot Device Priority	105
3.7.2 Boot Settings Configuration	106
3.7.3 Security	107
3.8 Tools menu	109
3.8.1 ASUS EZ Flash 2	109
3.8.2 ASUS O.C. Profile	110
3.8.3 TweakIt Batch File	111
3.8.4 AI NET 2	112
3.9 Exit menu	113
Chapter 4: Software support	115
4.1 Installing an operating system	117
4.2 Support DVD information	117
4.2.1 Running the support DVD	117
4.2.2 Drivers menu	118
4.2.3 Utilities menu	119
4.2.4 Make disk menu	121
4.2.5 Manual menu	121
4.2.6 Video menu	122
4.2.7 ASUS Contact information	122
4.2.8 Other information	123
4.3 Software information	125
4.3.1 ASUS MyLogo3™	125
4.3.2 Sound Blaster X-Fi audio utility	127
4.3.3 ASUS PC Probe II	131
4.3.4 ASUS AI Suite	137
4.3.5 ASUS AI Nap	139
4.3.6 ASUS Fan Xpert	140
4.3.7 CPU Level Up	142
4.3.8 ASUS EPU-6 Engine	143
4.3.9 ASUS TurboV	147
4.4 RAID configurations	149
4.4.1 RAID definitions	149
4.4.2 Installing Serial ATA hard disks	150
4.4.3 Setting the RAID item in BIOS	150
4.4.4 Intel® Matrix Storage Manager option ROM utility	151
4.5 Creating a RAID driver disk	156
4.5.1 Creating a RAID driver disk without entering the OS	156
4.5.2 Creating a RAID driver disk in Windows®	156
Chapter 5: Multiple GPU technology support	159
5.1 ATI® CrossFireX™ technology	161
5.1.1 Requirements	161
5.1.2 Before you begin	161
5.1.3 Installing CrossFireX graphics cards	162
5.1.4 Installing the device drivers	163
5.1.5 Enabling the ATI® CrossFireX™ technology	163
5.2 NVIDIA® SLI™ technology	165
5.2.1 Requirements	165
5.2.2 Installing SLI-ready graphics cards	166
5.2.3 Installing the device drivers	167
5.2.4 Enabling the NVIDIA® SLI™ technology	167

Match case Limit results 1 per page

ROG Rampage II GENE

3-19

3.4.4

SATA 1–6

While entering Setup, the BIOS automatically detects the presence of Serial ATA

devices. There is a separate sub-menu for each SATA device. Select a device item

then press <Enter> to display the SATA device information.

The BIOS automatically detects the values opposite the dimmed items (Device,

Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and

SMART monitoring). These values are not user-conﬁgurable. These items show

[Auto] if no IDE device is installed in the system.

Type [Auto]

Selects the type of SATA drive. Setting to [Auto] allows automatic selection of the

appropriate SATA device type. Select [CDROM] if you are speciﬁcally conﬁguring a

CD-ROM drive. Select [ARMD] (ATAPI Removable Media Device) if your device is

either a ZIP, LS-120, or MO drive.

Conﬁguration options: [Not Installed] [Auto] [CDROM] [ARMD]

LBA/Large Mode [Auto]

Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the

device supports this mode, and if the device was not previously formatted with LBA

mode disabled. Conﬁguration options: [Disabled] [Auto]

Block (Multi-sector Transfer) M [Auto]

Enables or disables data multi-sectors transfers. When set to [Auto], the data

transfer from and to the device occurs multiple sectors at a time if the device

supports multi-sector transfer feature. When set to [Disabled], the data transfer

from and to the device occurs one sector at a time.

Conﬁguration options: [Disabled] [Auto]

PIO Mode [Auto]

Selects the PIO mode. Conﬁguration options: [Auto] [0] [1] [2] [3] [4]

BIOS SETUP UTILITY

Main

Select the type

of device connected

to the system.

←→

Select Screen

↑↓

Select Item

Change Field

General Help

F10

Save and Exit

ESC

Exit

SATA 1

Device

:Hard Disk

Vendor

:HDT722516DLA380

Size

:164.7GB

LBA Mode

:Supported

Block Mode:16Sectors

PIO Mode

Async DMA :MultiWord DMA-2

Ultra DMA :Ultra DMA-5

SMART Monitoring:Supported

Type

[Auto]

LBA/Large Mode

[Auto]

Block(Multi-Sector Transfer)M [Auto]

PIO Mode

[Auto]

DMA Mode

[Auto]

SMART Monitoring

[Auto]

32Bit Data Transfer

[Enabled]