Asus TS300-E5 User Guide - Page 194
mount -r /dev/fd0 /media/floppy, cd /media/floppy, cd; umount /media/floppy
UPC - 610839652525
View all Asus TS300-E5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
Red Hat® Enterprise During Red Hat® OS installation To install the RAID controller driver when installing Red Hat® Linux OS: 1. Start the RedHat Linux Installation by booting from the install CD. At the "Welcome to Red Hat Linux..." installation screen, a prompt labeled boot: will appear at the bottom of the screen. 2. Type linux dd acpi=off and press Enter. 3. When the Installer asks, "Do you have a driver disk?" click Yes. 4. At the "Insert your driver disk and press OK to continue," insert the driver diskette into the floppy drive and click OK. 5. Continue with the installation normally. On first installation mode, do not choose the Virtualization option. FastTrak does not support it. To an existing Red Hat® OS To install the RAID controller driver on an existing Red Hat® Linux OS: 1. Insert FastTrak driver diskette into the floppy drive. 2. Log in as root. 3. Type mount -r /dev/fd0 /media/floppy. 4. Type cd /media/floppy 5. Type sh ./install. 6. When the installer asks, "You are installing a driver on an existing OS. Is it true (y/n)?" type Y and press Enter. 7. Type cd; umount /media/floppy. 8. Remove the FastTrak driver diskette. 9. Type reboot to restart the system. 7-18 Chapter 7: Driver installation