Asus Terminator Tualatin 786 MANUAL TERMINATOR TUALATIN English V1.0 - Page 41

Hardware Setup Procedures

Get Asus Terminator Tualatin PDF manuals and user guides View all Asus Terminator Tualatin manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

3.4 Hardware Setup Procedures Before using your computer, you must complete the following steps: 1. Check motherboard settings 2. Install memory modules 3. Install the Central Processing Unit (CPU) 4. Install an expansion card 5. Connect ribbon cables, panel wires, and power supply 6. Setup the BIOS software WARNING! Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Unplug your computer when working on the inside. 2. Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case. 3. Hold components by the edges and try not to touch the IC chips, leads or connectors, or other components. 4. Place components on a grounded antistatic pad or on the bag that came with the component whenever the components are separated from the system. 5. Ensure that the ATX power supply is switched off before you plug in or remove the ATX power connector on the motherboard. WARNING! Make sure that you unplug the power supply when adding or removing system components. Failure to do so may severely damage the motherboard, peripherals, and/or components. When lit, the onboard LED indicates that the system is in suspend or soft-off mode, not powered OFF. ASUS Terminator Barebone System 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
ASUS Terminator Barebone System
41
Before using your computer, you must complete the following steps:
1.
Check motherboard settings
2.
Install memory modules
3.
Install the Central Processing Unit (CPU)
4.
Install an expansion card
5.
Connect ribbon cables, panel wires, and power supply
6.
Setup the BIOS software
3.4
Hardware Setup Procedures
WARNING!
Make sure that you unplug the power supply when adding or removing
system components. Failure to do so may severely damage the
motherboard, peripherals, and/or components. When lit, the onboard
LED indicates that the system is in suspend or soft-off mode, not
powered OFF.
WARNING!
Computer motherboards and expansion cards contain very delicate
Integrated Circuit (IC) chips. To protect them against damage from
static electricity, you should follow some precautions whenever you
work on your computer.
1.
Unplug your computer when working on the inside.
2.
Use a grounded wrist strap before handling computer components.
If you do not have one, touch both of your hands to a safely grounded
object or to a metal object, such as the power supply case.
3.
Hold components by the edges and try not to touch the IC chips,
leads or connectors, or other components.
4.
Place components on a grounded antistatic pad or on the bag
that came with the component whenever the components are
separated from the system.
5.
Ensure that the ATX power supply is switched off before you plug
in or remove the ATX power connector on the motherboard.