Asus Terminator Tualatin 786 MANUAL TERMINATOR TUALATIN English V1.0 - Page 54
Motherboard Information, USB Header 10-1 pin USBPORT, Infrared Module Connector 5-pin IR
View all Asus Terminator Tualatin manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
2. USB Header (10-1 pin USBPORT) If the USB port connectors on the back panel are inadequate, one USB header is available for two additional USB port connectors. Connect the USB header to a 2-port USB connector set and mount the bracket to an open slot on the chassis. (The USB connector set does not come with the motherboard package.) TUSC ® TUSC USB Ports USB Power USBP3- USBP3+ GND USB Power USBP2- USBP2+ GND NC 1 5 6 10 3. Infrared Module Connector (5-pin IR) This connector supports an optional wireless transmitting and receiving infrared module. This module mounts to a small opening on a system chassis that supports this feature. You must also configure the setting through UART2 Use Infrared (see 5.4.2 I/O Device Configuration) to select whether UART2 is directed for use with COM2 or IrDA. Use the five pins as shown in Back View and connect a ribbon cable from the module to the motherboard SIR connector according to the pin definitions. TUSC +5V (NC) IRRX GND IRTX Standard Infrared (SIR) ® Front View Back View SIR CIR (NC) GND CIRRX CIR+5V TUSC Infrared Module Connector IRTX +5V GND (NC) IRRX NOTE The TUSC motherboard does not use the CIR function. 54 Chapter 3: Motherboard Information