Audiovox ECCO Owners Guide - Page 7

Return to a Location 1. To wake the unit from Sleep, press Return (e3) for 1 second or until the LCD backlight comes on. The LCD message Ready appears. 2. To navigate to: • Last-locked position: simply press return button (e3). • Another stored position: press return button (e3) and location # (e5). 3. Follow the directional arrow (d4) on the LCD toward the active location (d7). Other information displayed on the LCD includes compass direction (d5) and distance (d6). Note: The unit remains on and active as long as it is acquiring GPS data to update the direction and distance information and you are moving more than 30 ft or 9 m every 5 minutes. If not, the LCD message No Movement appears and the unit goes to Sleep. Repeat step 1 to wake the unit up. When in Ready mode, press return button (e3) and the unit will resume the last selected course location. 4. If you travel off-course (that is, more than 22.5°, are headed in the opposite direction, or the distance (d6) is increasing), the red LED indicator (e1) flashes. 5. In the vicinity of 80 ft or 24 m from the active location (d7), the proximity ring (d3) blinks alternating large and small rings. 6. In the vicinity of 20 ft or 6 m, the LCD reads Found, and the proximity ring (d3) blinks large and small rings simultaneously. 7. After arriving, you can either select another location or simply do nothing. The unit automatically goes to Sleep after 2 minutes in the Found mode (see "Sleep Versus Off" on page 8). Page 7 7/12 128-8854