Beltronics Vector 945 Owner's Manual - Page 11

Controls and Features POWER-UP TEST SEQUENCE/ START-UP MODE Press the PWR button to turn the unit ON. Depending upon the Operating Mode selected, the power up test sequence and confirmation of Radar/Laser/SWS™ alerts will be relayed to you as follows: NORMAL (Factory Pre-Set Mode) A lengthy, power up test sequence that displays audio and text messages for laser, Ka, K, X and Safety Warning System® (SWS™) followed by the status of the General Selectable Features each time the unit is turned on. When complete, unit is ready for operation and will display Radar, Laser and SWS™ messages when signals are detected. Normal Mode is recommended when first using your V945. MODS (Modifications Mode) Presents audio and text messages for Laser, Ka, K, X and Safety Warning System® (SWS™), followed by ONLY those Selectable Features which have been modified by the user from their Factory pre-set state each time unit is turned on. Unit is ready for operation and will display Radar, Laser and SWS™ messages when signals are detected. Q-START (Quick-Start Mode) Unit will bypass the power up test sequence and will display the last selected traveling mode:"Au t o Sc a n ™" (factory default) "Hi g h w a y ", "C i t y X " or "Cit y ALL". Q-Start is recommended when you are comfortable with the detector and do not require a rundown of sample messages. Unit is ready for operation and will display Radar, Laser and SWS™ messages when signals are detected. Whichever Operating mode you select, V945 will be in standby mode and ready to detect traffic Radar, Laser and SWS™ signals. The display will show "Au t o Sc a n " (factory pre-set which is suitable for ALL driving conditions, unless you change this to "Hig h w a y ", "C i t y X " or "Cit y ALL" (see page 12). 8