Beltronics Vector 995 Owner's Manual - Page 8

31160_Vec995_OMrev 8/10/10 1:46 PM Page 15 Programming There are 7 user-selectable options so you can customize your V995 for your own preferences. The buttons labeled CITY and BRT are also used to enter the Program Mode, REVIEW your current program settings, and to CHANGE any settings as desired. The words PGM, RVW, and CHG are located on the top of the detector, and are highlighted in colored graphics. Pages 14-16 explain each option in more detail. How to use Programming 1 To enter Program Mode, press and hold both the CITY and BRT buttons down for 2 seconds. (The unit will beep twice, and will display the word Program). 2 Then press the RVW button to review the current settings. (You can either tap the button to change from item to item, or hold the button to scroll through the items). 3 Press the CHG button to change any setting. (You can either tap the button to change from setting to setting, or hold the button to scroll through all the options). 4 To leave the Program Mode, simply wait 8 seconds without pressing any button, or press the PWR button. (The unit will display Complete, beep 4 times, and return to normal operation). An example Here is how you would turn V995's AutoMute feature off. 1 Enter the Program Mode by holding both the CITY and BRT buttons down for 2 seconds. V995 will beep twice and display Program. 2 Then hold the RVW button down. V995 will scroll through the categories, starting with Pilot (Pilot), Voice (Voice), Power-on sequence (PwrOn), Signal strength meter (Meter), and then AutoMute (aMute). 3 Release the RVW button when V995 shows the AutoMute item. Since the factory setting is for AutoMute to be on, V995 will display aMute ON. (If you accidentally don't release the RVW button in time, and V995 goes to the next category, hold the RVW button down again, and after V995 scrolls through all categories, it will begin again at the top of the list.) 4 Press the CHG button to change from aMute ON to aMute OFF. 5 To complete the Programming, simply wait 8 seconds without pressing any button, or press the PWR button. The V995 will display Complete, beep 4 times, and return to normal operation. 12 Overview of Programming Press the REVIEW button to go from one category to the next PILOT (Power-on indication) VOICE POWER-ON SEQUENCE SIGNAL STRENGTH METER AUTOMUTE CITY MODE SENSITIVITY BANDS * Factory Default Settings To reset V995 to its original factory settings, press and hold the "CITY" and "BRT" buttons while turning the power on. V995's display will provide a "Reset" message, accompanied by an audible alert, acknowledging the reset. Press the CHANGE button to change your setting within a category Pilot HWY Pilot H Pilot V * Full word: Highway or AutoScan or City Letter: H or A or C Vehicle voltage Voice ON Voice OFF * Voice alerts on Voice alerts off PwrOn STD PwrOn FST * Standard power-on sequence Fast power-on sequence Meter STD Meter TEC * Standard signal strength meter Tech Display aMute ON aMute OFF * AutoMute on AutoMute off City STD City LoX City NoX * Standard City mode sensitivity Low X band sensitivity in City Mode No X band sensitivity in City Mode Bands DFT Bands MOD * All bands enabled One or more bands are disabled Turn bands "ON" or "OFF" by pressing the VOLUME/MUTE button X ON or OFF (default is on) K ON or OFF (default is on) Ka ON or OFF (default is on) POP ON or OFF (default is off) Ku ON or OFF (default is off) LSR ON or OFF (default is on) SWS ON or OFF (default is off) TSR ON or OFF (default is off) 13