Bernina Bernette 715 Manual - Page 42
t131§1i
View all Bernina Bernette 715 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
00000 nits 1413210 ao 00000000•0• of ne s is Our -e.. 1 O a 2 vc 3 76 000 . 00 00 t131§1i Buttonholes Set the machine as illustrated. (I) (Adjust the stitch length dial in the greenmarkedmotor aoorrect stitch density - vanes according to the fabric). Always lest sew a buttonhole. Follow the sequence. 42) Position the button on the loot as illustrated. Loosen the large screw t s" of the pail lc and slide it towards the button until it lightly touches the other edge. thenre-tightensaew"Er. Remove the button and attach the Buttonhole toot. The gauge is now set for sewing perfectly even length buttonholes. (3) When starting to sew the buttonhole. the gauge on the fool should be pushed fully forwards. (4) Use the seam ripper and cut buttonhole open from both ends towards the middle. Tips' - A slightly reduced upper thread tension produces beget results. - Use a backing for line or stretchy fabrics. - It is advisable to use gimp cord for stretch or knit fabrics. The zigzag should sew over the gimp.