Biostar M6VCT M6VCT user's manual - Page 55
Onboard Parallel Port, Parallel Port Mode, ECP Mode Use DMA, Parallel Port EPP type, Onboard Legacy
View all Biostar M6VCT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 2 BIOS Setup Onboard Parallel Port This item allows you to determine access onboard parallel port controller with which I/O Address. The Choices: 378/IRQ7 (default), 278/IRQ5, Disabled, 3BC/IRQ7. Parallel Port Mode Select an operating mode for the onboard parallel (printer) port. Normal EPP (Extend Parallel Port) ECP (Extend Capabilities Port) ECP +EPP PC AT parallel port Bidirectional Port Fast, buffered port Fast, buffered, Bidirectional Port. Select Normal unless you are certain your hardware and software both support EPP or ECP mode. The Choices: Normal (default), ECP, ECP/EPP,EPP. ECP Mode Use DMA Select a DMA Channel for the port. The Choice: 3 (default). Parallel Port EPP type Select a DMA Channel for the port. The Choices: EPP1.9 (default), EPP1.7. Onboard Legacy Audio Select an operating mode for the second serial port: The choices: Enabled (default), Disabled. Sound Blaster Hardware SoundBlaster Pro for Windows DOS box and real-mode DOS legacy compatibility. SB I/O Base Address Change the SoundBlaster Pro Base I/O Address settings. SB IRQ Select Change the SoundBlaster Pro interrupt signal. 2-19