Biostar M6VCT M6VCT user's manual - Page 59
PM Control by APM, The Choices, Video Off Option, Video Off Method, MODEM Use IRQ
View all Biostar M6VCT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Chapter 2 BIOS Setup PM Control by APM The Choices: No Yes (default) System BIOS will ignore APM when power Management is on. System Bios will wait for APM's prompt before it enters any PM mode. Video Off Option This determines the manner in which the monitor is blanked. Suspend -〉Off (default) During Suspend mode, the monitor will be turned off. All Modes -〉Off During All modes, the monitor will be turned off. Always On Video Off Method During Always mode, the monitor will be turned on. This determines the manner in which the monitor is blanked. V/H SYNC+Blank (default) This selection will cause the system to turn off the vertical and horizontal synchronization ports and write blanks to the video buffer. DPMS Support Initial display power management signaling. Blank Screen This option only writes blanks to the video buffer. MODEM Use IRQ This determines the IRQ in which the MODEM can use. The Choices: 3 (default), 4, 5, 7, 9, 10, 11, NA. 2-23