Bissell CrossWave Multi-Surface Wet Dry Vac 1785 User Guide - Page 5

Assembly WARNING Do not plug in your CrossWave™ until you are familiar with all instructions and operating procedures. 1 Insert handle into body of 2 unit until you hear a click. click Then, on the back of the 3 machine, align clean water tank with the grooves and slide tank into place until you hear a click. Wrap the cord around the quick release cord wrap and the lower cord wrap. 4 The Easy Clean Storage Tray consists of a machine storage tray and a brush roll drying tray. To assemble the Easy Clean Storage Tray, align arrows on the storage tray with the arrows on the brush roll drying tray and slide into place. NOTE: To easily unwrap the cord for use, just turn the quick release cord wrap downward to remove the cord from the cord wrap. Cleaning Formulas WARNING To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the hard floor device. Keep plenty of CrossWave™ formulas on hand so you can clean your hard floors and area rugs whenever it fits your schedule. CROSSWAVE™ FORMULAS Always use CrossWave™ formulas in your machine. Other solutions may harm the machine and void the warranty. Multi-Surface Formula Great for cleaning ALL sealed floors and area rugs Wood Floor Formula Area Rug Formula Restore your wood floors' natural shine Removes stuck on and embedded dirt from area rugs www.BISSELL.com 5