Bissell CrossWave Multi-Surface Wet Dry Vac 1785 User Guide - Page 8
Cleaning Area Rugs
View all Bissell CrossWave Multi-Surface Wet Dry Vac 1785 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Cleaning Area Rugs NOTE: Before cleaning area rugs, test an inconspicuous area of the rug for colorfastness. Also, please check manufacturer's tag before cleaning area rugs for any specialized cleaning instructions. Not for use on silk or delicate area rugs. 1 2 3 Plug machine into a properly grounded outlet. 4 Select cleaning mode: To start cleaning your rugs, turn the machine ON pressing the RUG button. Once the setting is selected, the dry vacuum will turn on. To turn OFF, press the RUG setting a second time. 5 Recline the body of the machine backward to start the brush roll spinning. To stop the brush roll spinning, you will need to stand the machine upright. 6 Before each use, hold the solution spray trigger for 10 seconds to prime the system with cleaning solution. LED lights illuminate when holding the trigger. NOTE: When solution is flowing, you will see bubbles forming at the edges of the brush roll window. To clean, hold the solution spray trigger to apply solution on both forward and backward passes. To dry area rugs faster, release the trigger and clean a second pass without dispensing solution. NOTE: The RUG button dispenses twice the solution of the HARD FLOOR button to help with area rug cleaning. TIP: For the most thorough clean, make 4 wet passes and 4 dry passes using overlapping strokes over each area you clean on your rugs. ATTENTION Do not over wet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature belt failure. 8 www.BISSELL.com