Bissell Pet Hair Eraser Upright Vacuum 1650 User Guide - Page 13
Cleaning & Replacing Top Pre-Motor Filters
View all Bissell Pet Hair Eraser Upright Vacuum 1650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Cleaning & Replacing Top Pre-Motor Filters 1 2 Press Tank Release Button and pull away from vacuum. Pull tab out on front of dirt container and pull handle up to open filter location. 3 Remove pre-motor filters from top of dirt container lid by pulling out. Both the Pre-Motor Mesh and Foam filters are washable. Clean with mild detergent, rinse and squeeze all excess water. Allow filters to dry completely before reinserting. 24 Place dry pre-motor filters h back in the top of dirt container placing the thick foam filter last. Cleaning & Replacing Bottom Post-Motor Filter 1 2 Press Tank Release Button and pull away from vacuum. With dirt container removed, pull tab up to access post-motor filter. 3 4 Twist filter counter-clockwise to unlock and remove from vacuum. Lift to remove filter. When reassembling, place filter back in unit and twist clockwise to "click" into place. The pleated filter may NOT be washed. If dust/debris accumulates, gently tap the filter on inside of a trash bin. NOTE: Replace this filter every 3 to 6 months. Visit BISSELL.com for Model 1650 filter replacements. www.BISSELL.com 13