Bissell Pet Hair Eraser Upright Vacuum 1650 User Guide - Page 15
Replace the Brush & Belt
View all Bissell Pet Hair Eraser Upright Vacuum 1650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Replace the Brush & Belt 1 2 3 Unplug vacuum, turn over and unscrew 9 Silver Phillips head screws to remove bottom cover. Pull roller straight out and slide belt off motor gear. Replace roller and/ or belt. 1. Inspect brush roll by placing it on its end and spin. The brush roll should spin freely, multiple times by one flick. If it doesn't, replace brush roll. 2. Inspect belt, replace if it appears damaged. 4 1. Place belt back on brush roll. 2. Pinch belt around brush roll & hook back around the silver motor gear. 3. Rotate brush roll into place and line up end caps. 4. Re-attach bottom cover with 9 screws. NOTE: If an object becomes lodged in foot and brush shuts off, turn vacuum off and unplug from electrical outlet. Remove obstruction and brush will automatically reset when vacuum is plugged and turned back on. Parts & Supplies For Parts and Supplies, go to www.BISSELL.com and enter your model number in the search field. www.BISSELL.com 15