Bissell Pet Hair Eraser Upright Vacuum 1650 User Guide - Page 9

Brush roll Safety Feature 1 If red light illuminates around height adjustment knob, you have tripped your brush roll motor safety feature. 3 It may have tripped because of use on premium soft carpet. Turn Height Adjustment Knob to the "high carpet" setting. Also check if debris is clogged in brush roll. Clear debris if necessary. 2 Power On/O Switch Put vacuum in upright position and turn it off. 4 Power On/O Switch Turn vacuum back on and try again. Above Floor Cleaning: Handle 1 2 To use tools and the hose/wand; turn the green knob aligning arrow with "hose/tool suction." 3 Press Handle Release Button to release handle from wand. 4 Pull straight up and out. 2-in-1 Pet Brush has white soft bristles for those gentle uses and rubber knobs for embedded pet hair. Use the collar with the white soft bristles side for delicate surfaces. Un-click the collar and flip around to use the rubber fingers for removing pet hair from your furniture. Listen for 2 "clicks" when reattaching. Once done using Handle, slide back on to Wand until it "clicks." Be sure to turn the green knob back to "Floor Suction" mode after using tools. www.BISSELL.com 9