Bissell PowerLifter PowerBrush Upright Carpet Cleaner 1622 User Guide - Page 5

ssembly, pecial features

Page 5 highlights

Assembly Your deep cleaner comes in three easy to assemble components: • Handle assembly • Upper body assembly • Lower body assembly Three Phillips head screws are also included and can be found taped to handle assembly. 1. The only tool you will need to assemble your cleaner is a Phillips head screwdriver. 1. Slide upper body assembly onto lower body and secure with two screws. 2. Slide handle assembly down into upper body until it will go no further and secure with screw. 2. Special features Warning: Do not plug in your cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures. Your BISSELL deep cleaner is a home cleaning system that uses a combination of hot tap water, BISSELL advanced cleaning formula, brush agitation and suction to safely clean carpets. DirtLifter® PowerBrush The DirtLifter PowerBrush is designed to enhance cleaning performance. The bristle pattern safely lifts out the deep down dirt while gently grooming carpet fibers. The floating suspension self-adjusts to all carpet heights. When the power is ON ( I ) and the machine is in the upright position, your carpet is protected because the brushes are lifted up off the carpet. Measuring cup Your deep cleaner is equipped with a measuring cup for adding the proper amount of formula to the 2-in-1 tank. For convenience the measuring cup is built into the lid of the 2-in-1 tank. 2-in-1 water tank Our 2-in-1 water tank system is designed with a heavy duty bladder inside for clean water. As you clean, the clean water in the bladder will empty and mix with the cleaning formula. Dirty water pulled out of your carpets will collect around the outside of the bladder so that clean and dirty water are always kept separate. This allows the user to maximize tank space, yet only carry one tank to and from the sink for emptying and filling. Tip: Deep cleaning carpeting regularly can reduce dust and allergens in your home. Warning: To reduce the risk of fire, use only BISSELL advanced deep cleaning formula for full size machines in your deep cleaner. Use of cleaning formulas that contain lemon or pine oil may damage this appliance and void the warranty. Chemical spot cleaners or solvent-based soil removers should not be used. These products may react with the plastic materials used in your deep cleaner causing cracking or pitting. Measuring Cup Carry Handle www.bissell.com 800.237.7691 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

1.
2.
5
www.bissell.com
800.237.7691
Your deep cleaner comes in three easy to
assemble components:
• Handle assembly
• Upper body assembly
• Lower body assembly
Three Phillips head screws are also included and
can be found taped to handle assembly.
The only tool you will need to assemble your
cleaner is a Phillips head screwdriver.
1.
Slide upper body assembly onto lower body
and secure with two screws.
2.
Slide handle assembly down into upper body
until it will go no further and secure with screw.
Your BISSELL deep cleaner is a home cleaning
system that uses a combination of hot tap water,
BISSELL advanced cleaning formula, brush
agitation and suction to safely clean carpets.
DirtLifter
®
PowerBrush
The DirtLifter PowerBrush is designed to
enhance cleaning performance. The bristle
pattern safely lifts out the deep down dirt while
gently grooming carpet fibers. The floating
suspension self-adjusts to all carpet heights.
When the power is ON (
I
) and the machine is
in the upright position, your carpet is protected
because the brushes are lifted up off the carpet.
Measuring cup
Your deep cleaner is equipped with a measuring
cup for adding the proper amount of formula to
the 2-in-1 tank.
For convenience the measuring
cup is built into the lid of the 2-in-1 tank.
2-in-1 water tank
Our 2-in-1 water tank system is designed with a
heavy duty bladder inside for clean water. As you
clean, the clean water in the bladder will empty
and mix with the cleaning formula. Dirty water
pulled out of your carpets will collect around the
outside of the bladder so that clean and dirty
water are always kept separate. This allows the
user to maximize tank space, yet only carry one
tank to and from the sink for emptying and filling.
A
ssembly
S
pecial features
WARNING:
Do not plug in your cleaner
until you have completely
assembled it per the
following instructions
and are familiar with all
instructions and operating
procedures.
WARNING:
To reduce the risk of fire, use only
BISSELL advanced deep cleaning for-
mula for full size machines in your deep
cleaner. Use of cleaning
formulas that contain lemon or pine oil
may damage this appliance and void
the warranty. Chemical spot cleaners or
solvent-based soil removers should not
be used. These products may react with
the plastic materials used in your deep
cleaner causing cracking or pitting.
Tip:
Deep cleaning carpeting
regularly can reduce dust and allergens
in your home.
Measuring Cup
Carry Handle