Bissell PowerLifter PowerBrush Upright Carpet Cleaner 1622 User Guide - Page 6

Page 6 highlights

Operation Before you clean 1. Plan activities to give your carpet time to dry. 2. Move furniture to another area if cleaning an entire room (optional). ATTENTION: Some Berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition. 3. Vacuum area with a dry vacuum cleaner before deep cleaning. 4. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit. 5. Pretreating (optional) Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entry ways and hallways. To pretreat: A. Using the BISSELL Tough Stain Pre-cleaner, generously spray evenly over soiled area, do not over wet. B. Wait 3-5 minutes before deep cleaning. C. Clean as normal using your BISSELL deep cleaner, following the instructions below. 1. 2. Fill the 2-in-1 water tank 1. With your foot, press the handle release lever on the back of the machine and lay handle down to access the tank. 2. Remove the tank from the base of the machine Handle Release Lever by lifting the tank carry handle. 3. Carry like a bucket to the sink. Rotate the handle 3. 4. toward the back of the tank to unlatch the lid. Remove lid, turn over and locate built in measuring cup. 4. Fill measuring cup with BISSELL 2X formula to the indicated fill line on the built in measuring cup and pour into mouth of the bladder. 5. 5. Fill up the bladder with clean hot tap water. *Do not boil or microwave water as it can 6. destroy the bladder. 6. Replace the top of the tank by matching the lid and tank edges. Handle must be in the forward position in order to replace lid. Rotate the handle to the carrying position to latch the lid. Note: Remember to secure the lid and test to make sure it is secure before picking up the tank. 7. 7. Place tank into machine base, seating firmly in place. Rotate tank handle back into latched position. Bring machine handle back into upright position. 6 www.bissell.com 800.237.7691

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
3.
7.
1.
2.
5.
6.
4.
Handle Release Lever
Before you clean
1.
Plan activities to give your carpet time to dry.
2.
Move furniture
to another area if cleaning an
entire room (optional).
3.
Vacuum area
with a dry vacuum cleaner
before deep cleaning.
4.
Plan your cleaning route to leave an exit path.
It is best to begin cleaning in the corner far-
thest from your exit.
5.
Pretreating (optional)
Pretreating is recommended to improve cleaning
effectiveness for heavily soiled carpet in high traffic
areas such as entry ways and hallways.
To pretreat:
A.
Using the BISSELL Tough Stain
Pre-cleaner, generously spray evenly over
soiled area, do not over wet.
B.
Wait 3-5 minutes before deep cleaning.
C.
Clean as normal using your BISSELL deep
cleaner, following the instructions below.
Fill the 2-in-1 water tank
1.
With your foot, press the handle release lever
on the back of the machine and lay handle
down to access the tank.
2
.
Remove the tank from the base of the machine
by lifting the tank carry handle.
3.
Carry like a bucket to the sink. Rotate the handle
toward the back of the tank to unlatch the lid. Remove
lid, turn over and locate built in measuring cup.
4.
Fill measuring cup with BISSELL 2X formula to
the indicated fill line on the built in measuring
cup and pour into mouth of the bladder.
5.
Fill up the bladder with clean hot tap water.
*Do not boil or microwave water as it can
destroy the bladder.
6.
Replace the top of the tank by matching the lid
and tank edges. Handle must be in the forward
position in order to replace lid. Rotate the handle
to the carrying position to latch the lid.
Note: Remember to secure the lid and test to make
sure it is secure before picking up the tank.
7.
Place tank into machine base, seating firmly
in place. Rotate tank handle back into latched
position. Bring machine handle back into
upright position.
O
peration
6
www.bissell.com
800.237.7691
ATTENTION:
Some Berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum or
deep cleaner may aggravate this
condition.