Bissell PowerLifter PowerBrush Upright Carpet Cleaner 1622 User Guide - Page 8
peration, aintenance and care
View all Bissell PowerLifter PowerBrush Upright Carpet Cleaner 1622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Operation Hard Floor Cleaning Your deep cleaner may have included a hard floor tool and Hard Floor Solutions Formula. The hard floor tool provides effective cleaning for linoleum, vinyl, and tile floors. Caution: Do not use on unsealed hardwood floors. 1. Thoroughly vacuum or sweep floor to pick up any debris. NOTE: Prior to filling with formula and water be sure all carpet cleaning formula is thoroughly rinsed from tank. 2. Fill BISSELL 2X Hard Floor Solutions Formula to the indicated fill line in the built in measuring cup and pour into mouth of bladder. 3. Fill the bladder with clean hot tap water and set aside. 4. Attach the hard floor tool to the bottom of the machine by hooking it into the nozzle and swinging it down until it clicks into place. 5. Be sure the ReadyTools dial is set to FLOOR CLEANING. 6. Plug into an outlet and turn the power on. 7. Plan your cleaning route to leave an exit path. Be sure to allow adequate time for floors to dry. 8. While pressing the spray trigger, make one slow forward wet pass and another back. Caution: Do Not Overwet. 9. Repeat the motion without pressing the trigger using the hard floor tool to squeegee and suction up the dirty water. 10. When finished, remove hard floor tool, rinse and let dry before storing. Refer to the Maintenance section below for machine clean up and storage instructions. Maintenance and care WARNING: To reduce the risk of fire and electric shock- when cleaning a hard floor, the BISSELL hard floor tool 203-5641 must be used and it must only be used with BISSELL Hard Floor Solutions or BISSELL 2X Hard Floor Solutions cleaning fluid intended for use with this appliance. 4. Machine care For best results, a few simple steps can assure your machine is well maintained after your cleaning is complete. 1. Turn power switch OFF (O). Unplug the machine and wrap the power cord. 2. After emptying the 2-in-1 water tank, rinse it out at a faucet with running hot tap water, taking care to clean underneath and around the heavy duty bladder. Clean out red lint screen. Removable nozzle may be rinsed if necessary. 8 www.bissell.com 800.237.7691