Bosch HMV3051U Installation Instructions - Page 18

4. Drill \ (9,5 mm) holes at A", B" and C" ř CAUTION:ĄWear safety goggles when drilling holes in the cabinet bottom. 5. Cut out the 2" (50,8 mm) hole at D". This hole is for the power supply cord. Note:ĄIf the cabinet is metal, use the nylon grommet around the opening to protect the cord. Adapting microwave blower 6. Cut out the shaded area E" using a saber or keyhole saw. 1. Remove and save the screws holding the blower motor and the blower plate. Lift up the blower plate and put it aside. 2. Carefully pull out the blower unit and rotate 90º so that fan blade openings are facing out the top of the microwave 1. 2. 3. Place the blower unit back into the opening. ř CAUTION:ĄDo not pull or stretch the blower unit wiring. Make sure the wires are not pinched, and that they are properly secured. 18