Bosch NIT3065UC Instructions for Use - Page 22

Automatic time limitation The automatic time limitation function is activated if the element is used for prolonged periods without any modifications being made. The element stops heating. r, i and the residual heat warning light t/s flash alternately on the element display. The indicator goes out when any symbol is pressed. The element can now be reset. When the automatic time limitation function is activated, this is controlled by the selected heat setting (from 1 to 10 hours). Basic settings The cooktop offers various basic settings. Some of these settings can be modified. o b Permanent childproof lock k childproof lock deactivated* The cooktop is automatically locked once b childproof lock activated switched off. o c Deactivating the beep k majority of beeps Short beep to confirm deactivated that a symbol button has been pressed or b some beeps long beep deactivated to warn that an incorrect operation has c all beeps activated* been performed. o f element automatic OFF function k automatic OFF The element always switches off deactivated* automatically once the time set on the b minute = minimum time timer has elapsed. jj minutes= maximum time o g o h o k * Basic settings Alarm duration of time programming function An alarm sounds once the period set on the timer elapses or after the time elapses for an area to be automatically switched off. Power Management Function This limits the total power of the cooktop. There are 17 setting levels. Increasing the setting level increases the power of the cooktop by 500 W. Restoring the default cooktop settings This clears all the customized settings. b 10 seconds c 30 seconds d 1 minute b = 1000 W minimum power b. - i. = from 1500 to 8500w j = 9000W maximum power k customized settings* b restore default settings 22