Home » Bosch Manuals » Laundry Washers » Bosch WAT28400UC » Manual Viewer

Bosch WAT28400UC Instructions for Use

Bosch WAT28400UC Manual

View all Bosch WAT28400UC manuals

Add to My Manuals
Save this manual to your list of manuals

Bosch WAT28400UC manual content summary:

Bosch WAT28400UC | Instructions for Use - Page 1
en-us Use and Care Manual, Installation Instructions Washer WAT28400UC
Bosch WAT28400UC | Instructions for Use - Page 2
enjoy the superior performance and reliability. Please do not hesitate to contact our Customer Service department if you have any questions or comments about your new washer. Thank you for choosing Bosch. Visit our web site at www.bosch-home.com/us for more information and to view a selection of our
Bosch WAT28400UC | Instructions for Use - Page 3
friendly use of your washer 8 Dimensions and clearances required 8 Appliance dimensions 8 Length of power cord and water supply hoses 8 Installation types 9 Installation instructions 10 Introduction 10 Tools needed 11 Waste disposal 11 Parts provided with your washer 11 Set up on
Bosch WAT28400UC | Instructions for Use - Page 4
ex: WFVC5330US/27) FD ex: FD 9005| 90001) Customer service Your washer does not require any special care other than the maintenance and care mentioned in this manual. If you have a problem with your washer, please consult ~ Troubleshooting; Page 30 This may save you money. If a technician comes
Bosch WAT28400UC | Instructions for Use - Page 5
washer. Not using HE detergent could cause problems such as oversudsing, extended cycle periods, or a decrease in wash performance. NOTICE: Do not use chlorine bleach!~ Operating Instructions is contained in this manual and on the warning labels located on your washer. Standard symbols and headings
Bosch WAT28400UC | Instructions for Use - Page 6
▯ Bosch washers are provided with an Operating, Care and Installation Instruction manual. Read and understand all instructions before or replace any part of the appliance or attempt any service unless specifically recommended in the user manual or in published user repair instructions that you
Bosch WAT28400UC | Instructions for Use - Page 7
and follow the use & care, important safety instructions and troubleshooting information contained in this manual. Please retain this manual for future reference. Standard features ▯ 15.4 lb (7 kg) large drum capacity (for regular cotton loads). ▯ Low washing and spinning noise levels. ▯ Large door
Bosch WAT28400UC | Instructions for Use - Page 8
Environmentally friendly use of your washer Your new Bosch washing machine is designed to use water, dryer manufacturer's instruction. Dimensions and clearances required Appliance dimensions E D Length of power cord and water supply hoses To left of washer* To right of washer* U.S. Metric
Bosch WAT28400UC | Instructions for Use - Page 9
Installation types Stacked washer and dryer A Bosch dryer of the same dimensions can be placed on top of the washer to save space. Use the special washer-dryer stacking kits (noted in Bosch Dryer User Manuals) which can be purchased from customer service or your local dealer. % Stand alone (shown)
Bosch WAT28400UC | Instructions for Use - Page 10
spacing dimensions for min. open area sizes G 3 in. 7.6 cm H 14 in. 35.6 cm Installation instructions 9 WARNING machine. Do not hold on to protruding parts (e.g. door) when lifting. Do not push service use caution when reaching inside the washer housing. These installation instructions
Bosch WAT28400UC | Instructions for Use - Page 11
tools may be helpful during installation of your washer. Parts provided with your washer Back side of the washing mashine ▯ pack; contents: ▯ User manual ▯ Warranty ▯ Covers with hose holders 8 Drain hose @ Elbow to form the hose to fit the drain pipe Washer drum contents Two reinforced water
Bosch WAT28400UC | Instructions for Use - Page 12
Cold water hose NOTICE: If any parts are missing please notify your dealer immediately. Set up on a pedestal with drawer Pedestal item number: WMZ 20490 Mount washer on the pedestal according to the instructions in the installation kit. Installation checklist Review the following list and check off
Bosch WAT28400UC | Instructions for Use - Page 13
the pedestal installation instructions. ▯ In order to prevent transport damage during later transport, be sure to re-install the bolts before transport. 3. Place covers over the transport bolt holes Four plastic covers are provided in the small parts bag included with your washer. Separate these
Bosch WAT28400UC | Instructions for Use - Page 14
14,5 to 145 psi (1 - 10 bar) with a minimum of 2.2 U.S. gallons (8 liters) of flow per minute. A pressure regulator valve must be installed if the maximum water pressure is exceeded. ▯ Make sure the water supply faucet is easily accessible when the washer parts included with your washer . (20-44 mm)
Bosch WAT28400UC | Instructions for Use - Page 15
to extend it downward as far as necessary to raise the corner of the washer the correct amount to level the washer. 3. When the height of the foot is correct, use a 17 mm open end wrench to tighten the locknut against the washer bottom. The locknut should be tight against the bottom of the
Bosch WAT28400UC | Instructions for Use - Page 16
cord during operation. Grounding Instructions 9 WARNING ELECTRICAL SHOCK HAZARD washer power cord plug. ▯ The washer power cord plug must be easily accessible when the washer is operating. ▯ When unplugging or plugging in the washer cords can be purchased from Customer Service. To reduce the risk of
Bosch WAT28400UC | Instructions for Use - Page 17
wall outlet. 2. Turn off the water supply to the washer. 3. Disconnect water supply lines from the tap. 4. Disconnect slot in the plastic bushing as the bushing is slid into place. The open part of the bushing slot should be facing the direction shown to allow the assembly to each snug in place. 17
Bosch WAT28400UC | Instructions for Use - Page 18
Spin Speed To change the default cycle settings. Indicator lamp lights up if the setting is active. @ Selectable Spin Speed ranges No Spin, Low, Med, High H Cycle status sequence ▯ Wash N ▯ Rinse O ▯ Spin 0 P 4 Digit Display for settings and information ▯ Finish time adjustable in 1h (hour) steps to
Bosch WAT28400UC | Instructions for Use - Page 19
make sure your washer has been installed properly by following the installation instructions in this manual. ~ Installation instructions; Page 10 Check is lit. There is no need for additional confirmation on your part. The settings or options are not retained after the appliance is switched
Bosch WAT28400UC | Instructions for Use - Page 20
surfaces of the washer. If necessary, wipe off spray traces and other traces/drops immediately with a soft cloth. Measuring Measure out the detergent and laundry care products according to: ▯ the water hardness; consult your water utility company for details ▯ the manufacturer's instructions on the
Bosch WAT28400UC | Instructions for Use - Page 21
duration and the symbols for the cycle progress. Child lock You can secure the washer against inadvertent changing of the set functions. To do this, activate the child Rinse. 3. Touch Start/Pause. For cycles with a low temperature: 1. Touch Start/Pause. 2. Select Drain. 3. Touch Start/Pause. 21
Bosch WAT28400UC | Instructions for Use - Page 22
Cycle end End appears in the display field and the Start/Pause button indicator lamp is off. If this symbol Åappears in the display, the washer has detected too much foam and it automatically adds an additional rinse to remove the foam. NOTICE: Use less detergent the next time you run
Bosch WAT28400UC | Instructions for Use - Page 23
no loose debris (coins, keys, other hard objects) are placed in the washer drum. ▯ Close any fasteners (such as zippers and hooks) that could cause to catch or become entangled. ▯ Remove any foreign objects or non-washable parts. ▯ Turn trousers and knitted wear inside out prior to washing. ▯ Place
Bosch WAT28400UC | Instructions for Use - Page 24
, e.g. tea towels, baby items, work clothing NOTICE: When measuring the amount of all detergents/ additives/care products and cleaning agents, please always check the manufacturer's instructions and information. 24
Bosch WAT28400UC | Instructions for Use - Page 25
, work and play clothes. Cold No spin empty Extra hot High Special cycle for cleaning the drum full load 1/3 Hot load Warm Cold Med Low No spin Hand and machine washable wool/wool blend fabrics Especially gentle washing cycle to avoid shrinkage, long cycle pauses (clothing rests in suds and
Bosch WAT28400UC | Instructions for Use - Page 26
or blended fabrics Perm Press Heavy Soil Cold Low No spin SpeedPerfect, Prewash, Extra Rinse M in accordance with the manufacturer's instructions (clean first if necessary). Dyeing/ 8 h, then touch the Start button to start the washer. NOTICE: The cycle duration is included in the set Finish
Bosch WAT28400UC | Instructions for Use - Page 27
not exceed the maximum load. ~ Program selection table; Page 25 Cleaning and maintenance Your washer is designed to give you many years of service. Observe the following instructions to maintain and protect your washer and keep it in top operating condition. 9 WARNING RISK OF ELECTRIC SHOCK HAZARD
Bosch WAT28400UC | Instructions for Use - Page 28
that give off large amounts of fluff may also cause blockage. To access the washer drain pump, the service cover must first be removed (see steps below). With the service cover removed, proceed as follows: 1. If the washer has not been drained, try to drain it now. Turn the program selector to
Bosch WAT28400UC | Instructions for Use - Page 29
to drain the remaining water into a suitable container (up to 5.3 U.S. gallons/20 liters of water may be drained). Pull the sealing cap from the hose and by screwing tightly into position. Handle must be vertical. 8. Snap the service cover in place at the hinges and close it.Wipe up any spilled
Bosch WAT28400UC | Instructions for Use - Page 30
machine door if water can be seen through the glass. 1. Turn the washer off by rotating the cycle selector to the Off position. Any running program opened. General Troubleshooting If you encounter a problem, consider the suggestions and instructions below before you call customer service. 9 WARNING
Bosch WAT28400UC | Instructions for Use - Page 31
Determing the Problem Problem Possible cause(s) Solution(s) Washer door cannot be Child lock is activated. opened. Water pressure too low. Eliminate the cause. Water cannot be seen in the drum. The water level in your high efficiencey front load washer is below the visible part of the drum
Bosch WAT28400UC | Instructions for Use - Page 32
Problem Possible drainage pipe and/or drainage hose. Water is coming out from underneath the washer. Water supply hose is leaking: is not Eliminate the cause: tighten the loads. No Spin was selected Select a spin speed setting (Low, Med or High) Detergent residue on the laundry. Some phosphate
Bosch WAT28400UC | Instructions for Use - Page 33
water inlet strainers; Page 28 Cold water pressure too low. Eliminate the cause. E:93 Hot water tap not Page 5 Pump is blocked (obstructed). Clean the washer drain hose and/or the drain pipe. May need , call customer service. Customer service Contact the Customer Service department if your
Bosch WAT28400UC | Instructions for Use - Page 34
resale, or commercial use. ▯ Within the United States or Canada, and has at all times remained within the country of original those shipped with your Bosch washer, and any consequential damages , Bosch would still pay for labor and parts and ship the parts to the nearest authorized service provider
Bosch WAT28400UC | Instructions for Use - Page 35
to follow operating instructions, mishandling, unauthorized service (including self wrong with the Product; correction of installation problems (you are solely responsible for any structure and DIRECT DAMAGES WHICH ARE DEFINITIVELY CAUSED EXCLUSIVELY BY BOSCH, OR OTHERWISE. SOME STATES DO NOT ALLOW
Bosch WAT28400UC | Instructions for Use - Page 36
*9001002399* 9001002399 9504 1901 Main Street, Suite 600 • Irvine, CA 92614 • 1-800-944-2904 www.bosch-home.com • © 2012 BSH Home Appliances

Section	Page
en-us Use and Care Manual, Installation Instructions	1
Washer	1
Table of contentsen-us Use and Care Manual, Installation Instructions	3
Your washing machine is intended for 5	3
Importance and meaning of symbols 5	3
IMPORTANT SAFETY INSTRUCTIONS 6	3
Introduction to your new washer 7	3
Dimensions and clearances required 8	3
Installation instructions 10	3
Getting to know your appliance 18	3
Operating Instructions 19	3
Signal 22	3
Laundry 23	3
Laundry detergents and additives 24	3
Program selection table 25	3
Default Program and Option settings 26	3
Additional Program Option settings 27	3
Cleaning and maintenance 27	3
Troubleshooting 30	3
Customer service 33	3
STATEMENT OF LIMITED PRODUCT WARRANTY 34	3
Important information	4
Purchase information	4
Customer service	4
1. Contact your installer or the Authorized Service Provider in your area and explain to them why you are not satisfied. This will usually correct the problem.	4
2. If after working with your installer or service technician the problem still has not been resolved to your satisfaction, please let us know either by writing to us at: BSH Home Appliances 1901 Main Street, Suite 600 Irvine, CA 92614 or calling us at:	4
Your washing machine is intended for	5
NOTICE:	5
Importance and meaning of symbols	5
9 WARNING	5
electrical shock hazard	5
9 CAUTION	5
NOTICE:	5
Tip:	5
IMPORTANT SAFETY INSTRUCTIONS	6
READ AND SAVE THESE INSTRUCTIONS	6
WARNING	6
WARNING	6
IMPORTANT SAFETY INSTRUCTIONS	7
READ AND SAVE THESE INSTRUCTIONS	7
WARNING	7
WARNING	7
Introduction to your new washer	7
9 WARNING	7
risk of fire, electric shock or injury	7
Standard features and helpful information	7
Special features	7
Environmentally friendly use of your washer	8
Dimensions and clearances required	8
Appliance dimensions	8
Length of power cord and water supply hoses	8
Installation types	9
Installation instructions	10
9 WARNING	10
Risk of fire, electirical shock or injury to persons	10
9 CAUTION	10
Washing machine is heavy	10
Introduction	10
NOTICES	10
Tools needed	11
Waste disposal	11
9 WARNING	11
Warnings for children	11
9 WARNING	11
To avoid risk of injury or death, do the following	11
Parts provided with your washer	11
NOTICE:	12
Set up on a pedestal with drawer	12
Installation checklist	12
Importance of installing on a solid, level floor	12
Remove the transport bolts	13
9 CAUTION	13
Damage to the appliance or injury possible	13
1. Remove hoses from the brackets.	13
2. Loosen and remove all 4 transport bolts. Remove the sleeves. Take the power cable out of the brackets.	13
3. Place covers over the transport bolt holes Four plastic covers are provided in the small parts bag included with your washer. Separate these covers and install one in each hole where the transport bolts were removed. Lock covers firmly by pressing...	13
NOTICE:	13
Water connections	13
NOTICES	13
NOTICES	14
9 WARNING	15
Scalding	15
Note:	15
NOTICE:	15
Leveling the washer	15
1. Install the washer on a level and solid surface, preferably in a corner of a room.	15
2. If the floor is uneven (or unlevel) adjust the washer feet as required to level the washer. Do not place anything under the washer feet to help level the washer.	15
3. Extend the washer feet no more than is necessary. The more the feet are extended, the more vibration the washer will experience. Start with the washer feet turned all the way in and adjust each foot as necessary.	15
4. Use a bubble level to check the top of the washer to make sure it is level side to side and front to rear.	15
5. Press down on each corner of the washer top to make sure the washer doesn’t “wobble“. There should be no \	15
6. When the washer is level and does not wobble, lock the washer feet in place by tightening the locknuts against the washer bottom. Be sure to do this without changing the height of the foot (hold the foot while tightening the locknut).	15
1. After determining which washer feet need to be extended, have someone lift up on the washer slightly to take pressure off the foot to be adjusted.	15
2. Turn the grey plastic foot to extend it downward as far as necessary to raise the corner of the washer the correct amount to level the washer.	15
3. When the height of the foot is correct, use a 17 mm open end wrench to tighten the locknut against the washer bottom. The locknut should be tight against the bottom of the washer to lock the foot in place.	15
Electrical connection	15
9 WARNING	15
Electrical shock hazard	15
9 WARNING	15
Electrical Shock hazard	15
9 WARNING	16
Electrical Shock hazard	16
To reduce the risk of electrical shock:	16
9 WARNING	16
Electrical shock hazard	16
Transporting the washer	17
1. Disconnect the washer power cord from the wall outlet.	17
2. Turn off the water supply to the washer.	17
3. Disconnect water supply lines from the tap.	17
4. Disconnect the drain hose from the drain location.	17
5. Install the transport bolt assemblies as shown in the following images.	17
1. Remove all four transport bolt hole covers.	17
2. Pull the tip of the arrow on the cover out slightly to disengage the locking tab.	17
3. Rotate the cover counterclockwise to remove. Repeat for all 4 transport bolt hole covers.	17
1. Each assembly consists of a plastic bushing and a bolt that extends through the bushings. Unscrew the bolt until the threaded end is flush with the end of the plastic bushing.	17
2. Insert the transportation bolt and bushing assembly as shown. The metal housing slides around the bolt through the slot in the plastic bushing as the bushing is slid into place. The open part of the bushing slot should be facing the direction show...	17
3. When the bolt is in place screw it in until the bolt threads engage the drum. Double check and ensure bolts are screwed into threaded holes and not into cracks or crevices. Repeat the process for all 4 transportation bolt assemblies before tighten...	17
Getting to know your appliance	18
Control panel	18
Operating Instructions	19
9 WARNING	19
Before doing any laundry with your washing machine	19
Before loading your first load of laundry	19
Using the cycle selector to choose a wash cycle	19
NOTICE:	19
Changing default cycle settings	19
Selecting additional cycle settings	19
Loading the laundry	19
9 WARNING	19
Tip:	19
Tips	20
Filling the detergent and additives compartments	20
NOTICE:	20
9 WARNING	20
Irritation of eyes/skin!	20
NOTICE:	20
Tips	20
1. Open the detergent dispenser tray.	21
2. Add detergent or additive.	21
3. Avoid overfilling the compartment to prevent early dispensing.	21
4. Close the detergent dispenser tray completely before starting the wash cycle.	21
Tip:	21
1. Pull out the detergent dispenser tray. Press down on the insert and remove the drawer completely.	21
2. Push the liquid detergent insert forward and down as shown.	21
3. Reinsert the tray into its compartment.	21
NOTICE:	21
Starting the cycle	21
NOTICE:	21
Child lock	21
NOTICE:	21
Selecting a different cycle	21
1. Touch Start/Pause.	21
2. Select another cycle.	21
3. Touch Start/Pause. The new cycle starts from the beginning.	21
Pausing/Adding a garment to the cycle	21
For adding a garment after the cycle begins.	21
1. Touch Start/Pause.	21
2. Open door carefully and add or remove laundry item.	21
Note:	21
3. Close door.	21
4. Touch Start/Pause.	21
NOTICE:	21
Cancel cycle	21
1. Touch Start/Pause.	21
2. Cool the laundry off: Select Rinse.	21
3. Touch Start/Pause.	21
1. Touch Start/Pause.	21
2. Select Drain.	21
3. Touch Start/Pause.	21
Cycle end	22
NOTICE:	22
Removing laundry/switching the appliance off	22
1. Open the front door of the washer and remove the laundry.	22
2. Turn the cycle selector to the Off position. Appliance is switched off.	22
3. Turn off the water tap.	22
NOTICES	22
Signal	22
Activate adjustment mode	22
1. Select Cotton Normal on Position 1.	22
2. Hold down Start/Pause and turn the Program Selector to the right (Position 2). Release Start/Pause button.	22
Laundry	23
Preparing the laundry	23
NOTICE:	23
Sorting the Laundry	23
Identifying and treating stains	23
Laundry detergents and additives	24
Adding the correct amount of HE detergent	24
9 WARNING	24
NOTICE:	24
Program selection table	25
Tips	26
Starching	26
NOTICE:	26
Dyeing/bleaching	26
Soaking	26
1. Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions.	26
2. Turn the program selector to Cotton Normal Cold program.	26
3. Touch Start/Pause.	26
4. After approximately. ten minutes, touch Start/Pause.	26
5. After the required soaking time, touch Start/Pause again to continue or change the program.	26
NOTICES	26
Default Program and Option settings	26
Changing the temperature range	26
Changing the spin speed range	26
Finish in	26
NOTICE:	26
Additional Program Option settings	27
Extra Rinse +1, +2	27
Prewash PW	27
SpeedPerfect G	27
Note:	27
Cleaning and maintenance	27
9 WARNING	27
Risk of electric shock hazard!	27
Cleaning the housing and control panel	27
9 WARNING	27
Risk of explosion!	27
Cleaning the drum	27
Descaling the washer	27
NOTICE:	27
Cleaning the detergent dispenser tray	27
1. Open the detergent dispenser tray fully. Press down on the drawer catch (1) and pull the tray (2) from the washer housing.	27
2. Remove the insert (3) by grasping it and pulling it upwards from the detergent dispenser tray.	27
3. Clean the insert and the detergent dispenser tray by holding it under warm running water. Lightly wipe away any remaining detergent residue.	27
4. Attach the insert and slide the detergent dispenser tray back into place and close the tray securely.	27
Tip:	27
Cleaning the water inlet strainers	28
1. Turn off the water tap.	28
2. Turn the cycle selector to any wash cycle (not to Drain or Spin).	28
3. Touch Start/Pause and allow 30 seconds to pass.	28
4. Turn the cycle selector to the Off position.	28
1. Remove the hose from the tap.	28
2. Rinse the strainer under running water. Look at the strainer to see if any visible debris is still present. Rinse again if necessary to remove the debris.	28
3. Reconnect the hose to the tap.	28
1. Remove the hose from the inlet on the back of the washer.	28
2. Using narrow pliers, grasp and pull the strainer from the inlet port.	28
3. Rinse the strainer under running water.	28
4. Reconnect the hose to the back of the washer and turn on the water tap. Check to see if water flows by starting a warm water wash cycle.	28
NOTICE:	28
Cleaning the drain pump	28
9 WARNING	28
risk of scalding	28
1. If the washer has not been drained, try to drain it now. Turn the program selector to the Drain and touch the Start/Pause button. Wait a few moments to let the cycle drain the water from the drum. If the pump is totally blocked, the water will be ...	28
2. Shut off the tap so that no more water flows in and has to be drained.	28
3. Open and remove the service cover.	28
4. Loosen the screws and remove the protective film.	29
5. Use the pull-out drain hose located in the pump access opening to drain the remaining water into a suitable container (up to 5.3 U.S. gallons/20 liters of water may be drained). Pull the sealing cap from the hose and lay the hose over the side of ...	29
6. Turn the pump cover counterclockwise to remove it. A small amount of residual water may flow out when the cover is removed. Clean the interior of the pump housing, removing any debris or foreign objects. Check to be sure the impeller wheel at the ...	29
7. Reinstall the protective film over the pump access using both screws.	29
8. Snap the service cover in place at the hinges and close it.Wipe up any spilled water.	29
NOTICE:	29
Troubleshooting	30
Emergency door lock release	30
9 WARNING	30
Risk of scalding	30
9 WARNING	30
Risk of injury	30
9 CAUTION	30
Water damage and burn injury	30
1. Turn the washer off by rotating the cycle selector to the Off position. Any running program will then be cancelled. Disconnect the mains plug.	30
2. Allow the water in the drum to cool off.	30
3. Allow the washer drum to come to a stand still (no longer spinning).	30
4. Before opening the washer door, perform the drain procedure included in the pump maintenance section.	30
5. Loosen screws and remove the protective foil.	30
6. The washing machine door can then be opened.	30
7. The door can now be opened.	30
General Troubleshooting	30
9 WARNING	30
electric shock hazard	30
1. Turn the cycle selector to Off.	30
2. Disconnect the washer from the power outlet.	30
3. Turn off the water taps.	30
4. Call Customer Service.	30
NOTICE:	30
Error messages	33
Customer service	33
STATEMENT OF LIMITED PRODUCT WARRANTY	34

Match case Limit results 1 per page

en-us

Use and Care Manual, Installation Instructions

Washer

WAT28400UC