Bosch WAT28400UC Instructions for Use - Page 17
Transporting the washer
View all Bosch WAT28400UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Transporting the washer Before transporting the washer 1. Disconnect the washer power cord from the wall outlet. 2. Turn off the water supply to the washer. 3. Disconnect water supply lines from the tap. 4. Disconnect the drain hose from the drain location. 5. Install the transport bolt assemblies as shown in the following images. Remove the transport bolt hole covers 1. Remove all four transport bolt hole covers. 2. Pull the tip of the arrow on the cover out slightly to disengage the locking tab. 3. Rotate the cover counterclockwise to remove. Repeat for all 4 transport bolt hole covers. Insert the transport bolt assemblies 1. Each assembly consists of a plastic bushing and a bolt that extends through the bushings. Unscrew the bolt until the threaded end is flush with the end of the plastic bushing. 2. Insert the transportation bolt and bushing assembly as shown. The metal housing slides around the bolt through the slot in the plastic bushing as the bushing is slid into place. The open part of the bushing slot should be facing the direction shown to allow the assembly to slide fully into place. 3. When the bolt is in place screw it in until the bolt threads engage the drum. Double check and ensure bolts are screwed into threaded holes and not into cracks or crevices. Repeat the process for all 4 transportation bolt assemblies before tightening any all the way. Complete tightening all 4 bolt assemblies until they are each snug in place. 17