Bosch WAT28400UC Instructions for Use - Page 27
Additional Program Option settings, Cleaning and maintenance
View all Bosch WAT28400UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Additional Program Option settings Extra Rinse +1, +2 This feature is helpful for locations with very soft water or to generally improve rinsing results. It allows up to 2 additional rinse cycles to be added to selected programs and will increase program time. Prewash PW For heavily soiled washing. Pour 1/3 of normal detergent amount into pre-wash chamber I and remaining 2/3 into main wash chamber II. SpeedPerfect G For washing in a shorter time with a washing result comparable to that of the standard program. Note: Do not exceed the maximum load. ~ Program selection table; Page 25 Cleaning and maintenance Your washer is designed to give you many years of service. Observe the following instructions to maintain and protect your washer and keep it in top operating condition. 9 WARNING RISK OF ELECTRIC SHOCK HAZARD! To avoid risk of electric shock always disconnect the washer from the power outlet prior to cleaning. Never clean the washer with a pressure washer. Cleaning the housing and control panel 9 WARNING RISK OF EXPLOSION! To avoid risk of explosion never clean the washer with flammable solvents. As required, you may clean the washer housing and control panel. - use hot soapy water or a mild (non-abrasive) cleansing agent. - Dry with a soft towel. - Remove residue immediately. - Do not use high pressure spray. Cleaning the drum Metallic debris left in the drum can produce rust spots on the drum. Never use steel wool to try to remove these. Use a chlorine-free cleansing agent and follow the manufacturer's instructions. Descaling the washer Provided that you use correct amounts of detergent with your wash loads, descaling is not necessary. If descaling the washer drum does become necessary, please follow the descaling product manufacturer's instructions. Small amounts of descaling agent can be used to remove white spots on the washer drum caused by lime or mineral deposits or small amounts of rust caused by metal objects left in the drum. NOTICE: Descaling agents contain acids which may attack parts of the washing machine and may discolor the laundry. Cleaning the detergent dispenser tray If there is a buildup of residual detergent or additives, or if the softener compartment is not rinsed out well enough, it may be helpful to clean the dispenser. 1. Open the detergent dispenser tray fully. Press down on the drawer catch (1) and pull the tray (2) from the washer housing. 2. Remove the insert (3) by grasping it and pulling it upwards from the detergent dispenser tray. 3. Clean the insert and the detergent dispenser tray by holding it under warm running water. Lightly wipe away any remaining detergent residue. 4. Attach the insert and slide the detergent dispenser tray back into place and close the tray securely. Tip: Do not operate the washer without the detergent dispenser tray in place. Always keep the tray completely closed. 27