Bose T8S ToneMatch Mixer Multilingual Quick Start Guide - Page 13
Connecting the T4S/T8S to Your Computer, Connecting a Flash Drive to the T4S/T8S
View all Bose T8S ToneMatch Mixer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
System Setup Connecting the T4S/T8S to Your Computer The T4S/T8S provides a USB port for connecting it to a computer. This allows you to download performance scenes to a computer or install system updates. Visit bosepro.link/tmu for details on updating your system. When connected to a computer, you also can use the T4S/T8S as a general-purpose USB audio device for recording/playback. Note: The T4S/T8S operates at 48 kHz/24-bit. When using the T4S/T8S with recording software, you may need to configure the software settings for 48 kHz/24-bit operation. Note: Connecting the T4S/T8S to your computer requires a USB cable (Type A to Type B, not supplied). 1. Connect the mixer to a power source (ToneMatch® power supply for T4S/T8S or an L1 Model 1S/II for T4S only). 2. Plug one end of the USB cable into the mixer's USB 2.0 Type-B port (Figure 12). 3. Plug the other end of the USB cable into a USB port on your computer. 4. Turn on the mixer. Figure 12. T4S-to-USB connection ToneMatch port - To an L1 Model 1S/II system or an ToneMatch power supply Power switch USB cable (Type A to Type B) To computer USB port Connecting a Flash Drive to the T4S/T8S Plug in a USB 2.0/3.0 flash drive loaded with WAV/MP3 files into the USB 2.0 Type-A port to playback audio tracks to your mixer. Figure 13. Connecting a flash drive to the T4S English - 13