Bose VCS-300 Owner's guide - Page 11
Dolby, Digital, receiver, sound, interrupted
View all Bose VCS-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
How to set yourDolbyDigitalreceiver lir VCS-300"A speakers are compatible with the output rom Dolby Digital (AC-3) receivers. Take special care to set the channel output on the Dolby Digital screen menu to SMALL for both the center speaker and surround speakers. Receiver channel output Center Left and Right Surround (For VCS-300 surround speakers) Proper setting SMALL SMALL Follow the receiver owner's guide instructions for using the receiver test tone to verify your connections and to adjust the volume levels of the speakers. If the soundis interrupted The VCS-300 center channel speaker features an advanced automatic electronic protection circuit to prevent speaker damage due to an overload. When it detects an overload, the protection circuit intermittently shuts down and resets the speaker a fraction of a second later, until the overload is cleared. Intermittent play will continue for the duration of the overload. If you hear this interruption, turn down the volume to relieve the overload. You will hear the speaker resume normal play goen the volume is set at a safe level. te: The overload problem described here should occur only if the receiver is overdriven and sending a distorted signal, or when the center speaker is driven by an amplifier rated well above the 100 watts per channelmaximum fisted in "Compatibility" on page 13. • 11