Bose VCS-300 Owner's guide - Page 8
Setting, connections,
View all Bose VCS-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Setting Up Make the connections At the connection end of the speaker, slide or push one • terminal lever and insert the appropriate wire (Figure 6). 1. Connect one end of the speaker cord to your speaker. a. Attach the marked wire to the red (+) terminal. b. Attach the plain wire to the black (-) terminal. 2. Connect the other end of the same cord to your receiver or amplifier (Figure 7). a. Attach the marked wire to the red (+) terminal. b. Attach the plain wire to the black (-) terminal. • The center speaker connects to the CENTER SPEAKER outputs on the receiver. Some surround sound receivers have two sets of center channel speaker outputs. Use either set. • The left surround speaker connects to the LEFT SURROUND SPEAKER outputs. • The right surround speaker connects to the RIGHT SURROUND SPEAKER outputs. Center speaker Red terminal lever F@ Figure 6 How to make terminal connections to the cent. speaker and surround speakers Marked wire Surround speaker 0 0 0 Red terminal lever ( Marked wire 8