Bose Wave PCinteractive Owner's guide - Page 7

System Setup Installing the Wave/PC™ system hardware Figure 1 Carton contents Unpacking the carton Carefully unpack your system (Figure 1) and save all packing materials. The original packing materials provide the safest way to transport your Wave/PC system. If any part of the product appears damaged, do not attempt to use it. Notify Bose® Customer Service immediately. (See phone number listings on the inside back cover.) Note: Find the serial number on the bottom of the Wave/PC unit. Write it on your warranty card and in the space provided on page 6. Wave/PC unit AlarSmet Alarm Mode CloScket Tuning 1 3 2 Presets 5 4 6 VolumeAM/FM AUX On/Off Sleep/Snooze Wave Radio Time Alarm 1 Tuning 4 2 Presets Volume AUX 5 Sleep Station 3 6 Mute On Off AM FM Wave Radio Remote control Lithium battery 9V battery Remote control mounting strip Power cord Wave/PC Installation CD FM dipole antenna Wave/PC system cable (15 ft (4.6m)) Selecting a location for the Wave/PC unit Your Wave/PC unit includes a 15 ft (4.6 m) interface cable allowing for greater flexibility in placement. Feel free to place and position the Wave/PC unit where you find the sound most pleasing. However, keep these useful guidelines in mind when selecting its location: Note: Do not place the Wave/PC unit very close to your computer monitor. Doing so will degrade AM/FM tuner reception. • Make sure the Wave/PC unit is within reach (15 ft (4.6m)) of your computer. • For best performance, place the Wave/PC unit at least 2 ft (61 cm) away from your typical seating position. • Do not place your Wave/PC unit on top of the monitor. • For best bass performance, locate your Wave/PC unit within 2 ft (61 cm) of a wall. • Place the Wave/PC unit on a flat surface. • Do not place the Wave/PC unit on a metal surface. Doing so could degrade AM reception. PDF259774_00 April 12, 2001 7