Brother International BAS-326E Network Users Manual - English - Page 95
Memory Switches 00 - 0F
View all Brother International BAS-326E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
s Memory Switches (00 - 0F) Chapter 6 Power supply and electrical parts adjustment SW No. memo-00 memo-01 When ON When moving to the home position, the feed plate moves in the order X → Y and the start position moves in the order Y → X. When moving to the home position, the feed plate moves in the order Y → X and the start position moves in the order X → Y. memo-02 The forward position becomes the home position, and movement is in the order Y → X and X → Y. Used for attaching buttons. memo-03 Automatic ejector operates. (It is available by special order.) DIP switch A-7 is set to ON. Cassette is held by automatic ejector and the sewing machine automatically starts. memo-04 memo-05 Needle stops in up position during emergency stop: (Needle normally stops in down position.) When sewing is finished, the feed plate moves via the machine home position to the start position. memo-06 After the final stitch, the work clamp rises and then the feed plate returns to the start position. memo-07 memo-08 Intermittent work clamp is not used (does not rise). When using an alternating clamping presser (1/4 ON, 3/4 OFF), and when sewing overlapping rectangles. memo-09 Wiper is changed to pneumatic wiper. (Pneumatic wiper is available as an option.) memo-0A Jog feeding becomes faster during programming. memo-0b memo-0c ON when a two-stage tensioner is used. (Two-stage tensioner is available as an option.) Single-pedal operation by means of two-stage work clamp switches. DIP switch A-2 is ON memo-0d Clearing the emergency stop switch action is carried out using the STEP BACK switch. memo-0E memo-0F Test feeding is carried out at the same speed as normal sewing. (For checking feed operation) After sewing is finished, the work clamp automatically opens and closes once (practice operation) s Memory Switches (20 - 2F) SW No. When ON memo-20 During feed test operation, feeding 100 stitches at a time is possible using the STEP BACK ç switch. memo-21 After the home position is detected and the machine moves to the sewing start position, the ç work clamp rises automatically. memo-22 When extended option output No.1 is ON, the sewing machine starts automatically. ç memo-23 Set to ON when the bobbin changer is being used. (This part is available by special order.) ç Note:C indicates that these functions are available for software versions MN-C or later. BAS-311E.311EL.326E.326EL 87