Brother International BAS-341E Programmer Instruction Manual - English - Page 129
Saving, Ending program, Curve, Programming, When a split is made
View all Brother International BAS-341E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Chapter 3 Programming with Command Function Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. Ending program 1. Press P . Curve A pattern with curves is programmed. Be sure to press 7 8 9 L for a split at corner points C or E. If a split is not made, the corner will be round. When a split is made When a split is not made More intermediate points such as points B, D, F or G will create smooth curves. Programming 1. Press P . The work clamp moves to the home position and the programmer screen is displayed. 2. Move the work clamp with . Press L when the needle point is at point A of the pattern. The first stitch (point A) is programmed. 128 Programmer
Programmer
128
Chapter 3 Programming with Command Function
3
Saving
1.
Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
4
Ending program
1.
Press
P
.
Curve
A pattern with curves is programmed.
Be sure to press
L
7
8
9
for a split at corner points C or E. If a split is not made, the corner will be round.
When a split is made
When a split is not made
More intermediate points such as points B, D, F or G will create smooth curves.
1
Programming
1.
Press
P
.
The work clamp moves to the home position and the
programmer screen is displayed.
2.
Move the work clamp with
. Press
L
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.