Brother International BAS-341E Programmer Instruction Manual - English - Page 157
position of point D., marking with the needle to indicate
View all Brother International BAS-341E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Chapter 3 Programming with Command Function 2. Move the work clamp with so that the needle point is at B of the pattern. Record the coordinates (values of and ). If the moving distance is long, press F before movement. 3. Press R . The work clamp moves to the home position. 4. Press 1 and press . The needle point moves to point C. 5. Move the work clamp with coordinates recorded in step 2. for the The moved point is now D. If the moving distance is long, press F before movement. 6. Turn the pulley with a hand and put a marking with the needle to indicate the position of point D. 7. Turn the pulley with a hand and move the needle to the top point. 8. Press R . The work clamp returns to the home position. 9. Move the work clamp with . Press L when the needle point is at D of the pattern. Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. Ending program 1. Press P . 156 Programmer