Brother International BAS-341E Programmer Instruction Manual - English - Page 176
Offset
View all Brother International BAS-341E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
Chapter 3 Programming with Command Function 4. Move the needle to the corner point and input 7 8 L . 5. Repeat steps 3 and 4 and move the needle to the end point. Input 11 E. When the alarm sound is complete, the needle point moves to the end position. Offset Command to be used 4 M M 789L 788L 11 E Creating offset. Input the width of offset in . Values 1.0 - 9.9 mm are available for the width Example Width 1.5 mm Input 415 Input the stitch length in . Carrying out offset on the left side to the sewing path. Carrying out offset on the right side to the sewing path. Starting offset calculations. (This is the end code. Refer to page 179 for details.) 1. Select the sewing start position with and press L . 2. Determine the width and input 4 M. Programmer 175