Brother International BAS-341E Programmer Instruction Manual - English - Page 43
Selecting the symmetrical pattern type, Inputting the end code
View all Brother International BAS-341E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 2 Programming with Help Function 5. When point B is programmed, press . ESC The number of pressing ESC depends on the programming method. Selecting the symmetrical pattern type 1. Select with and press . 2. Select the symmetrical pattern type and press . (symmetric to Y axis) is selected in the example. 3. Input the number of feed boundaries to be ignored and press . Refer to "Editing the current data" (page 98) for details. 4. The needle point moves slowly from point B to point A in the right half and it is automatically programmed. Press to make fast movement. 5. Press ESC twice. Inputting the end code 1. Select with and press . 2. Select the end code type with and press . "111" is selected in the example. Press and the work clamp returns to the first stitch(point A). 3. Press . ESC The work clamp returns to the home position. 42 Programmer