Brother International BAS-610 Instruction Manual - English - Page 42
Carrier, Adjustments
View all Brother International BAS-610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
CARRIER FEED ADJUSTMENTS [2] < Carriage feed height adjustment> • Make sure that the carriage feed height is about 20 mm at the front edge at the home position. 20mm O- 20mm (Adjustment) Loosen nut 0 and adjust the height with bolt 0 . Loosen the bolt to raise the carriage feed and tighten the bolt to lower the carriage feed. * When adjusting, move the carriage feed back and forth by hand with the power switch set to OFF to make sure that the flap presser will not come into contact with the machine. Move the carriage feed and make sure that its edge and the folding plate edge are flush. The clearance between the needle and the folding plate should be approximately 1 mm when the folding plate is fully extended. * Move the carriage feed and make sure that the clearance between the needle and the folding plate is approximately 1 mm. o r O 0 imm 1 mm I 1 mm (Adjustment) • Loosen bolts and bring the carriage feed edge flush with the folding plate edge. 0 Loosen nut 0 and turn nut 0 to adjust the folding plate stroke. Loosen nut 0 to increase the fold amount. Tighten nut ID to decrease the fold amount. 1-1 Folding plate I I Carriage feed -38-