Brother International BAS-610 Instruction Manual - English - Page 47
Automatic, Manual, Program, Knife, Change, Cycle, Carriage, Forward, Backward, Thread, Trimmer,
View all Brother International BAS-610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
MODE AUTOMATIC MANUAL • PROGRAM • KNIFE CHANGE & CYCLE PGM. CARRIAGE FEED FORWARD BACKWARD 01/ Needle plate .0 9 1. Set MODE selector 0 to MANUAL. 2. Set CARRIAGE FEED switch Q to FORWARD to advance the carriage feed. 3. Set power switch 9 to OFF. 4. Remove slide plates R and L 0 . 5. Tilt the machine head. 6. Loosen screws and remove screws 9 ; remove knife bracket 0 . 7. Remove bobbin thread trimmer knives * Reverse the order above to install. (Cautions on installation) • Install bobbin thread trimmer knives Q so that it will not protrude from the needle plate top surface. • Install bobbin thread trimmer knives Q so that the knife grooves are aligned with the needle plate groove when the cylinder rod is fully retracted. THREAD TRIMMER UPPER O LOWER 90° Bobbin thread 0 0 -43-