Brother International DCP-L5600DN Mass Deployment Tool Users Guide - Page 16

3.2 Activate Solutions You can send license files to activate custom software solutions on the target devices. A valid license file is necessary for this task. A license file can contain many activation codes, allowing solutions to be activated on many devices simultaneously. If you do not have one, contact your local Brother office. 1. Make sure the device list contains all the devices you want. 2. Select Activate solutions from the drop-down list in the top bar. 3. The Activate solutions screen appears. The devices you cannot send the license to are shown as "Not supported". 4. Enter the device password in the Device password column, if needed. 5. Do one of the following: If you have a license file: Select the License file: radio button, and then type the file name in the field below, or click the Browse... button to select the license file. If you have license codes: Select the License code (20 digit number): radio button, and then type the license codes in the field below. Multiple codes can be entered, one license code per line. 6. Click the Browse... button next to the Save the result file to: field and specify where to save the result file. You can also copy and paste folder paths into this field. 7. Click the Activate button. 8. The Activate solutions dialog box shows the activation progress. You can also stop the operation by clicking the Stop button. 9. When completed, the summary results appear. If unsuccessful, the error status is also listed in the results. Click the Open log folder button, check the log details, and then try again. 13