Brother International FAX-1940CN User Guide - Page 23

Network Configuration List, Restoring the Network Settings to Factory Default, Menu/Set, Black Start

Page 23 highlights

Network Configuration List This feature prints a report listing all the current network Print / Fax Server Settings. 1 Press Menu/Set, 6, 6 for MFC-3340CN/MFC-5840CN. Press Report, press ▲ or ▼, select Network Config, press Menu/Set for FAX-1940CN/MFC-5440CN. 2 Press Black Start or Color Start. Restoring the Network Settings to Factory Default To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below. 1 Make sure the machine is not operating, then disconnect all the cables from the machine (except power cable). 2 Press Menu/Set, 5, 0 for MFC-3340CN/MFC-5840CN. (4, 0 for FAX-1940CN/MFC-5440CN) 3 Press 1 to select Reset. 4 Press 1 to select Yes. 5 The machine will re-start, re-connect cables once this is complete. 1 - 21 CONTROL PANEL SETUP

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

1 - 21 CONTROL PANEL SETUP
Network Configuration List
This feature prints a report listing all the current network Print / Fax
Server Settings.
1
Press
Menu/Set
,
6
,
6
for
MFC-3340CN/MFC-5840CN
.
Press
Report
,
press
or
, select
Network Config
, press
Menu/Set
for
FAX-1940CN/MFC-5440CN
.
2
Press
Black Start
or
Color Start
.
Restoring the Network Settings to Factory Default
To restore all network settings of the internal Print/Scan server to
factory default, please follow the steps below.
1
Make sure the machine is not operating, then disconnect all the
cables from the machine (except power cable).
2
Press
Menu/Set
,
5
,
0
for
MFC-3340CN/MFC-5840CN
. (
4
,
0
for
FAX-1940CN/MFC-5440CN
)
3
Press
1
to select
Reset
.
4
Press
1
to select
Yes
.
5
The machine will re-start, re-connect cables once this is
complete.