Brother International FAX-1940CN User Guide - Page 8

Gateway This field displays the current gateway or router address used by the machine. If you are not using DHCP or BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a gateway or router, leave this field blank. Check with your network manager if you are unsure. 1 Press Menu/Set, 5, 1, 4 for MFC-3340CN/MFC-5840CN. (4, 1, 4 for FAX-1940CN/MFC-5440CN) 2 Enter the Gateway address. ---OR--Select 1.Change and enter the Gateway address. 3 Press Menu/Set. 4 Press Stop/Exit. Host Name You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will be the name that is registered by the WINS server on your network. Brother recommends the name BRN_XXXXXX (where XXXXXX is the last six digits of the Ethernet address) (up to 15 characters). 1 Press Menu/Set, 5, 1, 5 for MFC-3340CN/MFC-5840CN. (4, 1, 5 for FAX-1940CN/MFC-5440CN) 2 Select 1.Change and enter the Host Name. 3 Press Menu/Set. 4 Press Stop/Exit. WINS Config This selection controls how the machine obtains the IP address for the WINS Server. 1 Press Menu/Set, 5, 1, 6 for MFC-3340CN/MFC-5840CN. (4, 1, 6 for FAX-1940CN/MFC-5440CN) CONTROL PANEL SETUP 1 - 6