Brother International FAX1860C Quick Setup Guide - English - Page 8

Setting Up the Machine 4 Take out the ink cartridge. 6 Install each ink cartridge in the direction of the arrow on the label. Take care to match the color of the lock release lever (1) with the cartridge color (2), as shown in the diagram below. 2 5 Carefully remove the protective yellow cap (1). 1 1 M brother XXXX 7 Lift each lock release lever and gently push until it clicks, and then close the ink cartridge cover. Improper Setup DO NOT touch the area shown in the illustration below. Note If the protective yellow cap comes off when you open the bag, the cartridge will not be damaged. 6 Note If the LCD shows Install Black, Install Yellow, Install Cyan or Install Magenta after you install the ink cartridges, check that the ink cartridges are installed properly. The machine will clean the ink tube system for use for the first time. This process will occur only once, the first time ink cartridges are installed. The cleaning process will last approximately four minutes. The LCD shows: Preparing System q Approx 4 Minutes Cleaning q Please Wait