Brother International HL-720 Users Manual - English - Page 47
the drum unit tightly so that toner powder does not spill out of
View all Brother International HL-720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
English: HL-YL User's Guide, Chapter 5 CHAPTER 5 MAINTENANCE Follow these steps to replace the drum unit: 1. Turn off the power switch. 2. Close the output tray and open the top cover. Remove the old drum unit. Fig. 5-10 Removing the Drum Unit Warning After you have just used the printer, some internal parts of the printer are extremely hot. When you open the top cover of the printer, never touch the shaded parts shown in the following illustration. High Temperature Fig. 5-11 Inside the Printer 3. Remove the toner cartridge from the drum unit and keep it in a safe place. For more information, see "REPLACING THE TONER CARTRIDGE" in this chapter. Note • Discard the used drum unit according to local regulations. If you are not sure of them, consult your local dealer/retailer. Be sure to seal up the drum unit tightly so that toner powder does not spill out of the unit. Do not discard used drum units together with domestic rubbish. • It is recommended to put the drum unit on a piece of disposable paper or cloth in case of accidental toner spill or scatter. 5-7