Brother International HL-720 Users Manual - English - Page 57

Troubleshooting

Get Brother International HL-720 - B/W Laser Printer PDF manuals and user guides View all Brother International HL-720 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

English: HL-YL User's Guide, Chapter 6 CHAPTER 6 TROUBLESHOOTING CHAPTER 6 TROUBLESHOOTING ALARM INDICATIONS AT A GLANCE Operator Calls If a recoverable error occurs, the printer indicates an 'operator call' by blinking the Alarm lamp and any of the following lamps. Find the error and take the proper action to correct it. The printer automatically recovers from most errors, but you may need to reset the printer with the panel switch as described below. Blinking Lamp Paper r£q Alarmr£q Toner r£q Alarmr£q (every 5 seconds) Toner r£q Alarmr£q (Fast blinking) Error Paper jam Paper empty Misfeed Toner low Action Clear the paper jam referring to the next section "PAPER JAMS" and press the panel switch if the printer does not automatically resume printing. Load paper in the printer referring to Chapter 2 and press the panel switch. Reinstall the paper and press the panel switch. Indicates that the printer has approximately 100 pages of printing left before the toner cartridge is empty. Prepare a new toner cartridge. Toner Empty Replace the toner cartridge with a new one referring to Chapter 5. 6-1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
CHAPTER 6 TROUBLESHOOTING
6–1
English: HL-YL User’s Guide, Chapter 6
CHAPTER 6
TROUBLESHOOTING
ALARM INDICATIONS AT A GLANCE
Operator Calls
If a recoverable error occurs, the printer indicates an ‘operator call’ by
blinking the Alarm lamp and any of the following lamps.
Find the error and take the proper action to correct it. The printer
automatically recovers from most errors, but you may need to reset the
printer with the panel switch as described below.
Blinking Lamp
Error
Action
Paper
↔●
Alarm
↔●
Paper jam
Clear the paper jam referring to the next section
“PAPER JAMS” and press the panel switch if the
printer does not automatically resume printing.
Paper empty
Load paper in the printer referring to Chapter 2
and press the panel switch.
Misfeed
Reinstall the paper and press the panel switch.
Toner
↔●
Alarm
↔●
(every 5 seconds)
Toner low
Indicates that the printer has approximately 100
pages of printing left before the toner cartridge is
empty. Prepare a new toner cartridge.
Toner
↔●
Alarm
↔●
(Fast blinking)
Toner Empty
Replace the toner cartridge with a new one
referring to Chapter 5.