Brother International Innov-is 6000D Operation Manual for Premium Pack IV Opti - Page 3

Using the Embroidery Foot "W2" with LED Pointer Included Embroidery foot with LED pointer indicates the needle position with a red LED point. The LED pointer shows you the location of the needle penetration so that it is easier to adjust the embroidery position. Included Item c Raise the presser foot lever. Part name Embroidery foot "W2" with LED pointer Part code XF6319-001 d Push the black button on the presser foot holder and remove the presser foot. Attaching Embroidery Foot "W2" a CAUTION • When attaching a presser foot, always press on the screen. You may accidentally press the "Start/Stop" button and possibly cause injury. • Be sure to use the embroidery foot "W2" or "W" (included with your machine) when doing embroidery. Using another presser foot may cause the needle to strike the presser foot, causing the needle to bend or break and possibly cause injury. a Press the "Needle Position" button to raise the needle. b a Black button b Presser foot holder → Remove the presser foot from the presser foot holder. e Use the screwdriver included with your machine to remove the screw of the presser foot holder, then remove the presser foot holder. b Press to lock all keys and buttons. → The entire screen becomes white, and all keys and operation buttons are locked. 2 a Screwdriver b Presser foot holder c Presser foot holder screw → Remove the screw and presser foot holder. Note • Instead of simply loosening the screw, it must be temporarily removed, while the embroidery foot "W" included with your machine can be installed simply by loosening the screw.