Brother International LK3-B438E MKII Instruction Manual - English - Page 25
. Operating procedure, Program No., X-scale, Speed rpm, Factory default, Variable range
View all Brother International LK3-B438E MKII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
5 . OPERATION 5-2 . Operating procedure Preparation Turn on the power switch. (The POWER indicator q will illuminate and the pro gram number will flash in the display window !4.) Program No. X-scale (%) Factory default Variable range 00 * 01 - 49 100 20 - 200 Y-scale (%) 100 20 - 200 Speed (rpm) 2000 1,000 - 2,500 * For checking the origin points for X and Y feed 5-2-1 . Setting the program number Determine the appropriate program from the program list which is given on pp. 3 - 5. 1 Press the SELECT switch y until the PROGRAM NO. indicator illuminates. P PROGRAM NO. X-SCALE y Y-SCALE 2 Press the DISPLAY SET switches !2 until the desired program number is flashing in the display window. 3 Depress the foot switch to the second step. * The display will stop flashing and illuminates steadily, and the feed mechanism will move to the sewing start position. 1st step 2nd step SPEED COUNTER SELECT This completes the setting of the pro- !2 gram number. 5-2-2 . Setting the X-scale and Y-scale 1 Press the SELECT switch y until the X-scale or Y-scale indicator illuminates. P PROGRAM NO. 2 Press the DISPLAY SET switches !2 until the desired scale setting is flashing in the display window. (The setting is displayed as a per- centage.) X-SCALE y Y-SCALE SPEED !2 COUNTER SELECT 3 Depress the foot switch to the second step. * The display will stop flashing and illuminates steadily, and the feed mechanism will move to the sewing start position. 1st step 2nd step This completes the setting of the X-scale or Y-scale. 5-2-3 . Setting the sewing speed 1 Press the SELECT switch y until the SPEED indicator illuminates. 2 Press the DISPLAY SET switches !2 until the desired speed setting is flashing in the display window. NOTE: Be sure to check the sewing pattern (refer to page 20) after setting has been completed to make sure that the needle drops down into the hole of the button. P PROGRAM NO. X-SCALE y Y-SCALE SPEED COUNTER SELECT !2 19 LK3-B438E Mark II