Brother International LK3-B438E MKII Instruction Manual - English - Page 58
TROUBLESHOOTING, Refer to Skipped
View all Brother International LK3-B438E MKII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
16. TROUBLESHOOTING Problem Cause Check 16. TROUBLESHOOTING Remedy Page Button clamp does not rise. Button clamp lifter amount is too great. Presser is contacting thread wiper. Distance between Adjust the height of button clamp and top the button clamp to 34 of needle plate within 17 mm. Thread wiper standby position Adjust the position of the thread wiper. 36 Button clamp does not drop. Presser lifter link is not moving back. Link return spring is unhooked. Hook the link return spring properly. Button clamp lift amount is incorrect. Incorrect position of button clamp holder hook assembly Distance between button clamp and top of needle plate Adjust the button clamp lift amount. 34 Thread wiper does not operate correctly. The thread wiper is obstructing the needle. Thread wiper position is incorrect. Clearance beween thread wiper and needle tip Thread wiper position Adjust the height of the thread wiper. 36 Adjust the operating distance of the thread 36 wiper. Lower thread winds to one side. Bobbin winder thread tension stud height is incorrect. Bobbin winder thread tension stud height Adjust the height of the thread tension stud. 22 Lower thread winding amount is incorrect. Bobbin presser position is incorrect. Thread winding amount Adjust the position of the bobbin presser. 22 Stitches being skipped at the sewing start. Refer to "Skipped stitches occur" Refer to "Skipped stitches occer". Threads comes unthreaded. Uneven upper thread length. Upper thread length Adjust the subtension. 23 Upper thread is too short. Thread take-up lever Adjust the thread 32 stroke take-up lever stroke. LK3-B438E Mark II 52