Brother International MFC-J4510DW Wi-Fi Direct Guide - English - Page 17

Network terms and concepts

Page 17 highlights

Glossary Network terms and concepts 4 Network terms 4  WPA2-PSK Enables a Wi-Fi Protected Access Pre-shared key (WPA-PSK/WPA2-PSK), which enables the Brother wireless machine to associate with access points using TKIP for WPA-PSK or AES for WPA-PSK and WPA2-PSK (WPA-Personal).  AES 4 Advanced Encryption Standard (AES) provides stronger data protection by using a symmetric-key encryption.  WPA2 with AES Uses a Pre-Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters.  SSID Each wireless network has its own unique network name and it is technically referred to as the Service Set Identification (SSID). The SSID is a 32-byte or less value and is assigned to the access point. The wireless network devices you want to associate to the wireless network should match the access point. The access point and wireless network devices regularly send wireless packets (referred to as beacons) which have the SSID information. When your wireless network device receives a beacon, you can identify wireless networks that are close enough to connect to. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

Glossary
14
4
Network terms and concepts
4
Network terms
4
WPA2-PSK
Enables a Wi-Fi Protected Access Pre-shared key (WPA-PSK/WPA2-PSK), which enables the Brother
wireless machine to associate with access points using TKIP for WPA-PSK or AES for WPA-PSK and
WPA2-PSK (WPA-Personal).
AES
Advanced Encryption Standard (AES) provides stronger data protection by using a symmetric-key
encryption.
WPA2 with AES
Uses a Pre-Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters.
SSID
Each wireless network has its own unique network name and it is technically referred to as the Service Set
Identification (SSID). The SSID is a 32-byte or less value and is assigned to the access point. The wireless
network devices you want to associate to the wireless network should match the access point. The access
point and wireless network devices regularly send wireless packets (referred to as beacons) which have
the SSID information. When your wireless network device receives a beacon, you can identify wireless
networks that are close enough to connect to.