Brother International MFC-J497DW Online Users Guide HTML - Page 586
Settings], All Settings], Network
View all Brother International MFC-J497DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 586 highlights
Level 1 Miscellaneous Level 2 Area Code (USA only) [Network] Level 3 - Descriptions Set your 3-digit area code only if you do not dial it within your own area code. [Settings] > [All Settings] > [Network] Level 1 Wired LAN (MFC-J895DW) WLAN Level 2 TCP/IP Ethernet Wired Status MAC Address TCP/IP Level 3 BOOT Method IP Address Subnet Mask Gateway Node Name WINS Configuration WINS Server DNS Server APIPA IPv6 BOOT Method IP Address Subnet Mask Gateway Node Name WINS Configuration WINS Server DNS Server APIPA IPv6 Level 4 Descriptions - Select the BOOT method that best suits your needs. - Enter the IP address. - Enter the Subnet mask. - Enter the Gateway address. - Enter the Node name. - Select the WINS configuration mode. - Specify the IP address of the primary or secondary WINS server. - Specify the IP address of the primary or secondary DNS server. - Set the machine to allocate the IP address from the link-local address range automatically. - Turn the IPv6 protocol on or off. For more information, go to the Brother Solutions Center at support.brother.com to see FAQs & Troubleshooting. - Select the Ethernet link mode. - View the current wired status. - View the machine's MAC address. - Select the BOOT method that best suits your needs. - Enter the IP address. - Enter the Subnet mask. - Enter the Gateway address. - Enter the Node name. - Select the WINS configuration mode. - Specify the IP address of the primary or secondary WINS server. - Specify the IP address of the primary or secondary DNS server. - Set the machine to allocate the IP address from the link-local address range automatically. - Turn the IPv6 protocol on or off. For more information, go to the Brother Solutions Center at support.brother.com to see FAQs & Troubleshooting. 579