Brother International MFC-J6920DW Wi-Fi Direct Guide - Page 14
One-push configuration using WPS
View all Brother International MFC-J6920DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Configuration methods One-push configuration using WPS 2 If your mobile device supports WPS or Push Button Configuration (PBC), follow these steps to configure a Wi-Fi Direct™ network. 2 NOTE When the machine receives the Wi-Fi Direct™ request from your mobile device, the message Wi-Fi Direct connection request received. will be displayed. Press OK to connect. If this happens before you reach step j in the instructions that follow, go directly to step j and continue configuration. a Press . b Press All Settings. c Press s or t to display Network. Press Network. d Press Wi-Fi Direct. e Press s or t to display Group Owner. f Press Group Owner, and then press On. g Press Push Button. h When Wi-Fi Direct On? is displayed, press On to accept. To cancel, press Off. i When Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed, activate your mobile device's WPS one-push configuration method (see your mobile device's user's guide for instructions) and then press OK on your Brother machine. This will start the Wi-Fi Direct™ setup. To cancel, press . j If your mobile device connects successfully, the machine displays the message Connected. You have completed the Wi-Fi Direct™ network setup. For more information on printing from or scanning to your mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the Brother Solutions Center (http://solutions.brother.com/). If the connection fails, see Troubleshooting on page 15. 11